1. I'm considering doin Robinette's SAB mod for some colder unrestriced air, and would like to see pix. Anybody got any?

2. The right side loops that hold the top to the bottom are all broken off. Is there a solution other than new air box?

TIA,
Jeff

 

https://www.rx7club.com/photo/showga...=1&ppuser=2939

 

Check out this airbox mod. Better performance than Robinettes, and much easier to install.

https://www.rx7club.com/forum/showth...ap+air+box+mod

You can probably find a new airbox bottom in the parts forum. Zip ties will work to reinforce the broken clips, if you can get them to stay in place.

Adam

 

I used a screw on each of the two corners that needed it when the side loops broke off ... work well and it's still easy to get the top off for cleaning .. need to be careful to get the holes right near the edge so you don't drill through the filter itself.

 

Just to give another option, here is mine, similar to adam's. You can check it out here: http://briefcase.yahoo.com/wickedrix

 

One More Option :
My version:
https://www.rx7club.com/photo/showga...r=2939&cat=500

I have gone even more radical since, must get new pics.