Steering Wheel Install: Protege w/Miata Airbag
#1
Junior Member
Thread Starter
Join Date: May 2013
Location: Indianapolis
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Steering Wheel Install: Protege w/Miata Airbag
Hey Guys,
In the middle of installing a steering heels off of a Protégé w/a Miata Airbag.
I'm good with most of the install but need some help with the wiring retaining my Horn/Cruise/Airbag.
I've attached pictures of the wires coming from the stock clock spring, the protégé wheel and the airbag. Really need some guidance in which wires to connect!
In the middle of installing a steering heels off of a Protégé w/a Miata Airbag.
I'm good with most of the install but need some help with the wiring retaining my Horn/Cruise/Airbag.
I've attached pictures of the wires coming from the stock clock spring, the protégé wheel and the airbag. Really need some guidance in which wires to connect!
#2
Boilermakers!
iTrader: (157)
Single wire (orange) is horn, goes to the red wire on the steering wheel. Two wires (blue) is the airbag, polarity do not matter. Cruise control is not so straight forward, you have to open up the switch and redo the whole circuit board.
Back of the steering wheel also needs to be modify to work with the clock spring.
Back of the steering wheel also needs to be modify to work with the clock spring.
Thread
Thread Starter
Forum
Replies
Last Post