3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Steam Cleaning

Old Aug 8, 2009 | 11:22 AM
  #1  
mid_life's Avatar
Thread Starter
Full Member
iTrader: (9)
 
Joined: Jul 2009
Posts: 51
Likes: 0
From: Ontario
ON Steam Cleaning

I am new to the rotary experience, just wondering if some one can tell me more about this steam cleaning idea... as in the desired benefits and proper procedure.
Reply
Old Aug 8, 2009 | 12:01 PM
  #2  
fendamonky's Avatar
F'n Newbie...
Tenured Member: 15 Years
Liked
Loved
Community Favorite
iTrader: (6)
 
Joined: Sep 2006
Posts: 3,942
Likes: 323
From: Nokesville, Va
Welcome to rx7club, I'd like to impart some critical knowledge on you... (you might not learn this by posting eight periods in the "Post here to increase your post count" thread...)


Learn to use the "Search" function, an integral part of this forum.

I promise, if you EVER have a question the first thing you should do is utilize the "Search" function. I'm willing to bet you a spare set of twins that somebody else has had the same question before, and asked.


That being said, a quick search of "steam clean" brought this thread up on the first page: https://www.rx7club.com/showthread.p...ht=Steam+Clean which in turn led to https://www.rx7club.com/showthread.p...ht=steam+clean and http://www.rotaryresurrection.com/2n...injection.html
Reply
Old Aug 8, 2009 | 08:18 PM
  #3  
Sgtblue's Avatar
Urban Combat Vet
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (16)
 
Joined: Oct 2003
Posts: 12,160
Likes: 983
From: Mid-west
Originally Posted by mid_life
...... tell me more about this steam cleaning idea... as in the desired benefits....
The short winded answer is that the rotary is prone to carbon build-up over time. In extreme cases, it can lead to stuck seals and/or detonation. The latter is particularly bad. Steam cleaning can reduce build-up.
Originally Posted by mid_life
....... and proper procedure.
It's not technically difficult. On the passenger side of your upper intake manifold (UIM) are two vacuum ports. Either one is used to injest distilled water into the running engine using a section of vacuum hose. This requires the throttle be manipulated to keep the car running and you should keep an eye on the exhaust as it will drastically raise exhaust temps.
Opinions on the recommended frequency of the procedure, amount of water to be used and possible consequences vary. Read through those threads linked above and do a search for more info and decide for yourself.
And welcome.
Reply
Old Aug 13, 2009 | 10:58 PM
  #4  
mid_life's Avatar
Thread Starter
Full Member
iTrader: (9)
 
Joined: Jul 2009
Posts: 51
Likes: 0
From: Ontario
ON what a debate

thanks for the help guys, I did do a search but didn't follow all the links. It turned into quite a debate with just a hint of animosity.
Reply
Old Aug 14, 2009 | 01:55 PM
  #5  
Montego's Avatar
Don't worry be happy...
Tenured Member: 20 Years
Loved
Community Favorite
Top Answer: 1
iTrader: (1)
 
Joined: Apr 2001
Posts: 6,901
Likes: 842
From: San Diego, CA
Originally Posted by mid_life
It turned into quite a debate with just a hint of animosity.
Well then you have arrived at the right place as that is regular business around here!

welcome
Reply
Old Aug 14, 2009 | 02:11 PM
  #6  
Supernaut's Avatar
Lives on the Forum
Tenured Member 15 Years
iTrader: (83)
 
Joined: Jun 2008
Posts: 5,859
Likes: 8
From: Los Angeles CA
Originally Posted by mid_life
thanks for the help guys, I did do a search but didn't follow all the links. It turned into quite a debate with just a hint of animosity.
Don't let the animosity bring you down. People are only that way because they are so passionate about their cars. If there weren't people like that, this forums like these would cease to exist.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
younG_Gunner
2nd Generation Specific (1986-1992)
2
Sep 9, 2015 08:26 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:38 AM.