Standalones on Stock
Standalones on Stock
Was thinking lately, what extremes can i go with ECUs like MoTec and AEM on stock motor.
if i wana learn about data logging while NOT damaging or disturbing the way my almost uber stock-running-perfect 13B-REW.
Is there ever a guide available to learn how to tune, MoTec or AEM datelogging?
if i wana learn about data logging while NOT damaging or disturbing the way my almost uber stock-running-perfect 13B-REW.
Is there ever a guide available to learn how to tune, MoTec or AEM datelogging?
You should check the Engine Management section:
https://www.rx7club.com/engine-management-forum-37/
There are sub-forums for various ECU manufacturers.
https://www.rx7club.com/engine-management-forum-37/
There are sub-forums for various ECU manufacturers.
just remember that one of the hardest things about tuning is getting your car to run just like it did on the stock ECU--holding a stable idle under all conditions, getting decent gas mileage (relatively speaking), and having smooth acceleration.
if you've never tuned a standalone before you are looking at a lot of work to get close to stock driveability
if you've never tuned a standalone before you are looking at a lot of work to get close to stock driveability
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
28
Apr 14, 2016 12:58 PM
armans
3rd Generation Specific (1993-2002)
5
Aug 15, 2015 09:08 PM






