Stalling problem
#1
Junior Member
Thread Starter
Join Date: Apr 2005
Location: California
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Stalling problem
Recently my FD3S has been sluggish. It usually happens when I'm attempting to accelerate after coming to a stop at a stop light or sign. I'll step on the gas pedal and it'll take a couple of seconds for my car to respond as it should. It feels like something's stuck and the needle won't even move higher than 2000 RPM.
I've noticed however that when I step on the brake really hard upon coming to a stop that I have no problem accelerating afterwards. The car is then as responsive as ever.
My friend thinks that brake master cylinder is going bad and is not properly releasing the calipers.
Anybody have any thoughts about this issue?
I've noticed however that when I step on the brake really hard upon coming to a stop that I have no problem accelerating afterwards. The car is then as responsive as ever.
My friend thinks that brake master cylinder is going bad and is not properly releasing the calipers.
Anybody have any thoughts about this issue?
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
REX7&Z32TT
New Member RX-7 Technical
5
09-09-15 05:16 AM