ss omp lines
Thread Starter
Joined: Apr 2005
Posts: 287
Likes: 0
From: north carolina
ss omp lines
Does anybody have a picture of how they routed their ss omp lines, the metel banjo fittings provide very little movement in the cramped area.
Adam
Adam
94 Single Turbo FD
Joined: May 2006
Posts: 1,418
Likes: 1
From: Calgary, Alberta, Canada
sorry dont have a pic.
it doesnt really matter how you run them though. dont be afraid to get a little creative.
the only thing to watch for is that they dont get caught up in the crank sensor/pulley.
it doesnt really matter how you run them though. dont be afraid to get a little creative.
the only thing to watch for is that they dont get caught up in the crank sensor/pulley.
Some old pictures in this thread:
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/help-big-problem-im-idiot-421227/
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/help-big-problem-im-idiot-421227/
Take your time. As I remember I had to re-route them a few times to avoid stressing the lines after tightening down the fittings. IIRC, I loosely anchored one end and then routed the line to see if it wanted to kink. If it did, I'd flip the end over and repeat until they would lay down nicely.
A couple more pictures FWIW........
A couple more pictures FWIW........
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
BLK 93
3rd Generation Specific (1993-2002)
11
Sep 9, 2015 10:56 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM
