Speedometer didn't work properly
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Sep 2007
Location: Germany
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Speedometer didn't work properly
...hey guys, i recently discovered some problems with my speedo.
I recognized the needle moving very slow over the scale, not fitting to the throttle input...it gets even worse when stopping the car. Depending on the speed before, it takes a eternity to get to 0. As example, when braking down from just 15-20mph, it took about 15 seconds.
I didn't recognized that in the past, but as i didn't changed anything on the speedo, i think its something wrong, but don't know where to start looking.
BTW: I have the full white mazdaspeed cluster.
I recognized the needle moving very slow over the scale, not fitting to the throttle input...it gets even worse when stopping the car. Depending on the speed before, it takes a eternity to get to 0. As example, when braking down from just 15-20mph, it took about 15 seconds.
I didn't recognized that in the past, but as i didn't changed anything on the speedo, i think its something wrong, but don't know where to start looking.
BTW: I have the full white mazdaspeed cluster.
Thread
Thread Starter
Forum
Replies
Last Post