Sparco Torinos in an FD
Infamous...Butcher...
Joined: Feb 2002
Posts: 510
Likes: 0
From: WA
no
Torinos will not just bolt in - you will need to make a custom rail, or import one. The seat is very wide too, I believe one of the side adjusters has to come off so they will fit in the car. Not a drop in replacement.
Notice most FD's have either Mazdaspeed, Bride, or Recaro seats...
Notice most FD's have either Mazdaspeed, Bride, or Recaro seats...
Originally posted by Lost Time
How 'bout the Corbeau CR-1? Anyone know if that one will fit?
How 'bout the Corbeau CR-1? Anyone know if that one will fit?
basically, the holes on the seats where the rails are SUPPOSE to bolt on to arent spaced far enough. so brackets needs to be made to extend the holes.
i bought a 1x1 steel bar and cut it into (4) 2.5 inch long sections. i drilled 2 holes in each of the steel peices (size hole depends on the bolts used and given). 1 hole to keep the bracket on the seat, and the other hole to attach the rails to the bracket. drill the holes so that the holes on the rail will line up with the holes on the bracket. so its about 1 inch gap between the holes.
your basically making extensions for the rail mounts. if the rail mount lines up with the seat, you dont need brackets.
i bought a 1x1 steel bar and cut it into (4) 2.5 inch long sections. i drilled 2 holes in each of the steel peices (size hole depends on the bolts used and given). 1 hole to keep the bracket on the seat, and the other hole to attach the rails to the bracket. drill the holes so that the holes on the rail will line up with the holes on the bracket. so its about 1 inch gap between the holes.
your basically making extensions for the rail mounts. if the rail mount lines up with the seat, you dont need brackets.