Wetn to install the power FC and I realized that none of the plugs fit! Do I need a harness or something?

Please advise!

 

????



The PFC should be plug and play. Check the plug lineup, each one is different and will only go into its corresponding hole. If you do this and you find you still cant get it hooked up, take some digital pics and post them here so we can see what is going on.

 

OMG...I think I purchased a Jspec Power FC!!!

****!

The plugs are completelly different, plus it's been tuned by R-Magic.

Any one know of a harness or something?

 

was the J-spec same? I thougt a lot people using J-spec one too. I could be wrong.

Are you sure that's for FD?

 

I bought this from a guy who just got back from Japan, I didn't even think about there being a difference.

Damn, what am I gonna do?

 

do you still have the box and all the paperwork??
If so PM me and maybe I can help.

 

Power FC is also made for Hondas. Maybe you got a Honda unit by mistake?

 

Ya, but R-magic doesnt tune Hondas

 

do you have this plug?

http://www.rmagic.net/shop_vol2/05/power_fc_upkit.JPG

 

No, I don't!

Isn't that harness for an FC?

 

That sux!
Sorry to hear bout that.

Good Luck

BTW Did you get my payment on the rims?

 

This is the Power FC I have http://www.rmagic.net/shop_vol2/05/power_fc.JPG

 

it supposes to come with the harness. Talk to Jason or whoever, see if they can get you that.

 

Put it up in eBay.

 

What was the number on the side of the box ?
Should be 414-Z002 or X002 for early cars.

After Mazda quit the US market they changed the ECU to a 16-bit unit which is totally different connector-wise. You cannot fit a Power FC meant for the 16-bit car in an 8-bit car.

Sorry, but i dont think youll shift it on E-bay either unless someone in the US has imported the later 96-on RX-7.

Try it on the european forum ?

Chris