3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

So, what gauges do you think are necessary

Thread Tools
 
Search this Thread
 
Old Jul 29, 2004 | 03:11 PM
  #26  
rynberg's Avatar
Lives on the Forum
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
Originally Posted by 7racer
I need a oil temp guage but don't like guages cluttering the interior (personal preference)....i wonder if there is a way for the PFC to read it???
NO.

Originally Posted by DamonB
For me the center speaker location is even better than the a-pillar pod I used before as far as sighting is concerned. I actually look at my gauges often when I'm on the track...
Me too. Damon, you should really check out Frank's tri-pod setup ("flyrx7"). It's a better match to the interior than the Tri-Power and you can use a third gauge. Although, if you've never viewed your oil temps in Texas heat, you might not want to know what they are....
Reply
Old Jul 29, 2004 | 03:19 PM
  #27  
DamonB's Avatar
Lives on the Forum
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 9,617
Likes: 8
From: Dallas
Originally Posted by rynberg
Damon, you should really check out Frank's tri-pod setup ("flyrx7"). It's a better match to the interior than the Tri-Power
IMO the dual gauge Tripower looks more stock than that one. I've seen it in person and though nice I still prefer my Tripower.

If I decide to add oil temp later I will remove the VDO water temp gauge and put an oil temp in its place. Then I will linearize the stock water temp gauge so I still only have 2 extra gauges in the cockpit.
Reply
Old Jul 29, 2004 | 03:27 PM
  #28  
Jim Calandrella's Avatar
Thread Starter
The Ricer Eliminator
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 647
Likes: 1
From: Boston
dammit! I just ordered the Autometer one because I couldn't find the tri power site, and even when I was on it before, they didn't advertise one.
M'er F'er..........
What's their website address?
Reply
Old Jul 29, 2004 | 03:37 PM
  #29  
areXseven's Avatar
il Cosa Nostra e vivo!!
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2003
Posts: 2,096
Likes: 1
From: Dove le cose sono fatte il vecchio moda il senso
Originally Posted by DamonB
IMO the dual gauge Tripower looks more stock than that one. I've seen it in person and though nice I still prefer my Tripower.
Plus, it's a "snap" to install. I improvised and used a clothe hanger (extended) to pull the wires from the top of the dash (already connected to the gauges) to the bottom where I connented all the hot/ground wires together.

It took me longer to cut and connect the proper length wires to the Gauges before I snaked them through the inner dash with the clothe hanger from the top.
Reply
Old Jul 29, 2004 | 03:38 PM
  #30  
Scrapiron7's Avatar
STi Boxer power!
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 2,160
Likes: 0
From: Austin, TX
You could try out the Border gauge pod if you feel like spending alot of $
Reply
Old Jul 29, 2004 | 03:42 PM
  #31  
DamonB's Avatar
Lives on the Forum
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 9,617
Likes: 8
From: Dallas
Originally Posted by Jim Calandrella
dammit! I just ordered the Autometer one because I couldn't find the tri power site, and even when I was on it before, they didn't advertise one.
M'er F'er..........
What's their website address?
www.rx7store.net has them
Reply
Old Jul 29, 2004 | 03:51 PM
  #32  
Jim Calandrella's Avatar
Thread Starter
The Ricer Eliminator
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 647
Likes: 1
From: Boston
They have the triple pod? I didn't see it represented there.
Maybe i'm making a mistake here , and noone mentioned the triple pod......
I was referring the the triple gauge pod that Tripower was going to make.......
Maybe hey never ended up making it.
Reply
Old Jul 29, 2004 | 03:54 PM
  #33  
RE13REW's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Jan 2003
Posts: 451
Likes: 0
From: San Francisco
i m using boost , a/f, water temp, and ex. temp
Reply
Old Jul 29, 2004 | 04:24 PM
  #34  
rynberg's Avatar
Lives on the Forum
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
http://hometown.aol.com/flyrx7/Rx7-Gauge-Pod.html
Reply
Old Jul 29, 2004 | 04:40 PM
  #35  
adam c's Avatar
Cheap Bastard
iTrader: (2)
 
Joined: Sep 2002
Posts: 8,368
Likes: 50
From: San Luis Obispo, Ca
Originally Posted by DamonB
adamc, I prefer the gauges up on the dash where I can see them easily. I don't like having to stick my eyes so far down into the car in order to check the gauges. For me the center speaker location is even better than the a-pillar pod I used before as far as sighting is concerned. I actually look at my gauges often when I'm on the track...
I agree that better visibility is more important for track use. My car sees the occasional autocross, and no track time. For me, a stock appearing gauge was the priority.
Reply
Old Aug 2, 2004 | 02:07 PM
  #36  
Jim Calandrella's Avatar
Thread Starter
The Ricer Eliminator
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 647
Likes: 1
From: Boston
My gauges came today!

The pod comes in tomorrow. I went with the autometer triple because it replaces the whole a pillar..........which some thieves(whom I caught in the act) ripped entirely out.
At least one of them won't ever walk straight again.......
I wanted to avoid it.......but i'm going to tint my windows now. Less temptation for the POS kids.
Reply
Old Aug 2, 2004 | 02:38 PM
  #37  
the FUN's Avatar
Full Member
Tenured Member: 20 Years
 
Joined: Apr 2002
Posts: 88
Likes: 0
From: NYC
Wow you caught them? nice! What's the story man? Were you parked on the street? Not sure how'd I react if I saw more than one guy trying to break into my car. Would I call the cops and wait, would I rush them and bust out the can of whoop ***...interesting?
Reply
Old Aug 2, 2004 | 02:53 PM
  #38  
Jim Calandrella's Avatar
Thread Starter
The Ricer Eliminator
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 647
Likes: 1
From: Boston
I completely lost all control. It was nothing I could control.
I was parked in a lot at a school about a block away from where I was playing sax for the night. On the way to the club, I met a girl I knew. I was talking with her for about 5 minutes when I heard glass break.
I walked back around the corner to see what was up, and to my horror saw two kids ravaging my car. I dropped everything and rushed them. This event was the 6th time I've had people break into, or key my car, so this was a long time brewing.
They saw me and tried to run. I caught one of them and beat him senseless. I kicked him........I lost it.......... and I mean totally lost it. He was almost incoherent. However, while I was wigging, the other kid snuck back and hit me over the head with what I can only think was my own gauge pod. Little F'er. I was down for a couple of seconds, and I got up just in time to see them hop into a car.
Had a nice lump on my head for a week. Nothing like what the other kid is...and maybe still is dealing with.
Maybe next time these kids will think twice before they show someone that kind of disrespect. As far as i'm concerned they need to learn accountability. You mess with someone's stuff, you have a chance of getting your *** kicked. The problem is, if circumstances were diffirent in any way, I could be the one that got in trouble. As long as the law allows the thieves to bwcome the victims, we will have to deal with this BS.
I don't know, maybe i'm just a bastard.
Reply
Old Aug 2, 2004 | 02:58 PM
  #39  
the FUN's Avatar
Full Member
Tenured Member: 20 Years
 
Joined: Apr 2002
Posts: 88
Likes: 0
From: NYC
Wow, thankfully you're OK. That's exactly what I'd be worried about - the other one sneaking up and hitting me. Luckily it wasn't something more substantial like the Club.

Good luck with the everything.
Reply
Old Aug 2, 2004 | 03:01 PM
  #40  
Jim Calandrella's Avatar
Thread Starter
The Ricer Eliminator
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 647
Likes: 1
From: Boston
I know. I am lucky.
But, that's all in the past now. I'm on the comeback trail now.
Gauges today......toe links and control arms Thursday.....and the following week rebuilt twins.
I should be good to go in 3 weeks.
Reply
Old Aug 2, 2004 | 03:13 PM
  #41  
adam c's Avatar
Cheap Bastard
iTrader: (2)
 
Joined: Sep 2002
Posts: 8,368
Likes: 50
From: San Luis Obispo, Ca
Jim,

It sounds like you need a beater to drive to those "high risk" areas.
Reply
Old Aug 3, 2004 | 12:04 PM
  #42  
Jim Calandrella's Avatar
Thread Starter
The Ricer Eliminator
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 647
Likes: 1
From: Boston
I do have a beater. I have an 88 Monte SS. The problem is, is that it looked nice as well, so they vandalized that. They keyed it when I went in to a pizza shop to grab a slice. I came out and they had done it...........and people wonder why i'm quite willing to put myself in danger just to protect my ****.......
I've just had bad luck I guess.
Reply
Old Aug 3, 2004 | 01:32 PM
  #43  
GoodfellaFD3S's Avatar
Original Gangster/Rotary!
Veteran: Army
Tenured Member: 25 Years
Liked
Loved
iTrader: (213)
 
Joined: Mar 2001
Posts: 30,807
Likes: 648
From: FL-->NJ/NYC again!
Originally Posted by Jim Calandrella
I do have a beater. I have an 88 Monte SS. The problem is, is that it looked nice as well, so they vandalized that. They keyed it when I went in to a pizza shop to grab a slice. I came out and they had done it...........and people wonder why i'm quite willing to put myself in danger just to protect my ****.......
I've just had bad luck I guess.
Damn dude, i have never had these problems in texas. Maybe it is the northeast, or big cities? I am moving back to NJ in about a week, and I am worried about my FD now, lol......
Reply
Old Aug 3, 2004 | 01:38 PM
  #44  
KaiFD3S's Avatar
SINFUL7
Tenured Member 15 Years
iTrader: (37)
 
Joined: Apr 2004
Posts: 6,574
Likes: 1
From: Alaska
Crazy story......
Reply
Old Aug 4, 2004 | 02:57 PM
  #45  
Jim Calandrella's Avatar
Thread Starter
The Ricer Eliminator
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 647
Likes: 1
From: Boston
Yeah, my old hood was pretty bad.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
kryan9
1st Generation Specific (1979-1985)
2
Sep 15, 2015 10:11 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM




All times are GMT -5. The time now is 08:50 PM.