3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Smoke from turbos at startup?

Thread Tools
 
Search this Thread
 
Old Feb 24, 2005 | 10:54 PM
  #1  
driFDer's Avatar
Thread Starter
Senior Member
Tenured Member: 20 Years
iTrader: (1)
 
Joined: May 2004
Posts: 538
Likes: 0
From: socal
Smoke from turbos at startup?

Well I woke up today and looked at my garage, thinking about how long the FDs been hibernating, sitting in there for what seems like forever. Ive been starting it up every week or so and today was that time once again.

The thing is when i started it up this morning I noticed something under the hood. I started it and walked to the engine. After about a minute or so I noticed faint smoke coming from the left side of the block, by the downpipe. I figured the downpipe got really hot and is letting off vapors but when I looked closer it looked like the smoke was coming from under the downpipe, down from the rear turbo.

After a minute of smoking it just stopped. Didnt really smell like anything. I remember in the summer I crawled under the car to look for the fuel filter and was checking out the engine from underneath. There was oil around the base of the rear turbo, while the front one didn't have any oil sorrounding it. I have been meaning to buy a gasket for the rear turbo to replace it but never got around to doing it. Could this be related to the smoke?

Also the car has a 10-8-10 pattern, sometime 10-8-12, but it doesn't feel like its at perfect boost. It feels like somethings holding it back. Not sure if that has anyhting to do with it but its another story of its own. My main question is what kind of process do I have to go through to get the 2nd turbo off? I know I have to take off intake, y-pipe, air pump but after that I have no clue.
Reply
Old Feb 24, 2005 | 11:05 PM
  #2  
Fatman0203's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member 05 Years
 
Joined: May 2003
Posts: 3,639
Likes: 0
From: MIA
The exhaust gasket may be falling , bad or w/e. I had the same problem and it was the gasket between the turbo and downpipe.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
86glxNA
New Member RX-7 Technical
7
Aug 22, 2015 08:54 PM
pzr2
General Rotary Tech Support
1
Aug 15, 2015 08:29 PM
WyomingTII
2nd Generation Specific (1986-1992)
5
Aug 13, 2015 10:42 AM




All times are GMT -5. The time now is 09:56 PM.