ok guys, i want to remove this b ad boy but am worried about what will happen. my buddy has his done and he put a resistor on the plug that plugs into the pump, took out the midpipe and when from the 3" downpipe to 2 1/2 inplace of the cat and the 3" after it. and did the block off plate involved with the smog. do i have anything to worry about...? thanx for your help....

 

Search Or Die.

 

Can cause idle fluctuation. Don't know if block off kit is the fix or not.

Requires pully kit (Greddy or similar)

Resistor? ...don't know what for.

Smaller DP to compensate for no air pump? ...don't understand the reasoning for this.

MP that goes from 3" to 2.5" to 3"? Can you rewrite your thread please, or rather rephrase the questions?

 

Agreed, if you're desparate, just search for threads posted in by me with "air pump" in them. Here, I'll help you out:

SEARCH

 

no guys im not desperate, i appreciate what u've added so far. I am sorry ofr the confusing words.... what he did was put a 2 1/2 " pipe in place of the midpipe. he said he down sized it for backpressure to mock the cat, for boost spikes. the down pipe i have ais the standard pettit. and the resistor is in place of the actual plug on the smog pump, to tell the engine it is still on, because when i disconnect the connector the engine tried to die. does that help? so, will i blow up!? no worries, i have been searchin the forum and a ton of threads have helped me so far. i aappreciate this site, it has sabved my life as i am sure yours! thanx again
chris