Single turbo quarter mile times??
#1
Lucky
Thread Starter
Join Date: Mar 2001
Location: Dubuque, Iowa
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts
Single turbo quarter mile times??
Hey guys, those of you with single turbos out there I was wondering what kind of actual 1/4 mile times you get. Feel free to list other mods also along with what single kit you are running, I am asking this to see what kit would be the best for me to go with. Also if you are street ported can you please let me know since I am not I wont expect those kind of numbers, thanks guys, I appreciate the input,
#5
Study the time on the left. This run was done with a street ported engine, T51, and ET Street tires. I think it would be safe to say that you too can expect simalar times.
-Tires ET Streets
-Launch 7k, 7-8psi and a 50 shot
-Boost level about 15-16 inchs of vacuum
-Axles left one dragging on the ground
-Tires ET Streets
-Launch 7k, 7-8psi and a 50 shot
-Boost level about 15-16 inchs of vacuum
-Axles left one dragging on the ground
#6
Senior Member
Join Date: Oct 2001
Location: Minnesota, now in FL and I dont think I'm goin back
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
I'd be curious to see the difference between turbos like T78 an Gt 35/40 and maybe a t04e or s =-) seeing as how I need to buy one now.
Mike
Mike
Trending Topics
#8
Lucky
Thread Starter
Join Date: Mar 2001
Location: Dubuque, Iowa
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by forcefed7
Study the time on the left. This run was done with a street ported engine, T51, and ET Street tires. I think it would be safe to say that you too can expect simalar times.
-Tires ET Streets
-Launch 7k, 7-8psi and a 50 shot
-Boost level about 15-16 inchs of vacuum
-Axles left one dragging on the ground
Study the time on the left. This run was done with a street ported engine, T51, and ET Street tires. I think it would be safe to say that you too can expect simalar times.
-Tires ET Streets
-Launch 7k, 7-8psi and a 50 shot
-Boost level about 15-16 inchs of vacuum
-Axles left one dragging on the ground
anyone else wanna post some info??
Steve
#9
Full Member
Join Date: Sep 2002
Location: Brisbane, Australia
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
I have run a 11.2 @ 121 on ET drags. on 12psi using a .7 front and a 1.32 rear garret t04 front mount IC 4 secondary injectors bosch 500hp fuel pump and 3inch exhaust and a microtech computer. with a street ported and dowelled motor.
Last edited by CTHIS RX7; 09-30-02 at 03:01 AM.
#10
Living life 9 seconds at a time
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by OneBadRx7
What the hell were you racing a moped?? Why did you say study the times on the left, they are way beyond pathetic. Anyways, you are running 10's huh, thats nice,
anyone else wanna post some info??
Steve
What the hell were you racing a moped?? Why did you say study the times on the left, they are way beyond pathetic. Anyways, you are running 10's huh, thats nice,
anyone else wanna post some info??
Steve
#11
Passenger
Posts: n/a
Originally posted by forcefed7
Study the time on the left. This run was done with a street ported engine, T51, and ET Street tires. I think it would be safe to say that you too can expect simalar times.
-Tires ET Streets
-Launch 7k, 7-8psi and a 50 shot
-Boost level about 15-16 inchs of vacuum
-Axles left one dragging on the ground
Study the time on the left. This run was done with a street ported engine, T51, and ET Street tires. I think it would be safe to say that you too can expect simalar times.
-Tires ET Streets
-Launch 7k, 7-8psi and a 50 shot
-Boost level about 15-16 inchs of vacuum
-Axles left one dragging on the ground
-Rikki
#15
Originally posted by OneBadRx7
What the hell were you racing a moped?? Why did you say study the times on the left, they are way beyond pathetic. Anyways, you are running 10's huh, thats nice,
anyone else wanna post some info??
Steve
What the hell were you racing a moped?? Why did you say study the times on the left, they are way beyond pathetic. Anyways, you are running 10's huh, thats nice,
anyone else wanna post some info??
Steve
I'm sorry if I confused anybody, That time slip was from yesterday in the finals@BOTI. I broke the axle on the start. It was only a joke. As far as your orginal question, it's pretty hard to say what "your" car would run. My car (full weight, 2935lbs) has run a best of 9.80@142, best mhp was the weekend before 9.99@145. that's Street ported motor, T51R Kai, bunch of boost and a 50 shot. On ET Streets. Again sorry for the confusion...
#17
WTB** Very Low Miles 94-95
Join Date: Jul 2001
Location: Tejas
Posts: 3,298
Likes: 0
Received 0 Likes
on
0 Posts
ernie just dated himself on that one.
lol
great times guys...the broken axle time cracked me up...I went expecting a ten and saw that. ahahah
lets see more!
j
lol
great times guys...the broken axle time cracked me up...I went expecting a ten and saw that. ahahah
lets see more!
j
#18
Passenger
Posts: n/a
Originally posted by forcefed7
I'm sorry if I confused anybody, That time slip was from yesterday in the finals@BOTI. I broke the axle on the start. It was only a joke. As far as your orginal question, it's pretty hard to say what "your" car would run. My car (full weight, 2935lbs) has run a best of 9.80@142, best mhp was the weekend before 9.99@145. that's Street ported motor, T51R Kai, bunch of boost and a 50 shot. On ET Streets. Again sorry for the confusion...
I'm sorry if I confused anybody, That time slip was from yesterday in the finals@BOTI. I broke the axle on the start. It was only a joke. As far as your orginal question, it's pretty hard to say what "your" car would run. My car (full weight, 2935lbs) has run a best of 9.80@142, best mhp was the weekend before 9.99@145. that's Street ported motor, T51R Kai, bunch of boost and a 50 shot. On ET Streets. Again sorry for the confusion...
Again congrats
-Rikki
#19
Full Member
Join Date: Sep 2002
Location: Brisbane, Australia
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by forcefed7
I'm sorry if I confused anybody, That time slip was from yesterday in the finals@BOTI. I broke the axle on the start. It was only a joke. As far as your orginal question, it's pretty hard to say what "your" car would run. My car (full weight, 2935lbs) has run a best of 9.80@142, best mhp was the weekend before 9.99@145. that's Street ported motor, T51R Kai, bunch of boost and a 50 shot. On ET Streets. Again sorry for the confusion...
I'm sorry if I confused anybody, That time slip was from yesterday in the finals@BOTI. I broke the axle on the start. It was only a joke. As far as your orginal question, it's pretty hard to say what "your" car would run. My car (full weight, 2935lbs) has run a best of 9.80@142, best mhp was the weekend before 9.99@145. that's Street ported motor, T51R Kai, bunch of boost and a 50 shot. On ET Streets. Again sorry for the confusion...
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
stickmantijuana
Engine Management Forum
11
11-09-15 01:15 PM