single turbo on auto harness question.
#1
single turbo on auto harness question.
OK i am doing the single turbo wire harness conversion on my automatic wire harness. My FD is already converted to a manual so nothing auto is being used except the wire harness.
as you can see at the pics below i have all these extra wires and connectors.
My question is:
can eliminate all these wires and adapters and convert the auto harness like a manual harness would be converted?
auto harness
Closer view of the ECU connectors.
What it should look like after the mod.
as you can see at the pics below i have all these extra wires and connectors.
My question is:
can eliminate all these wires and adapters and convert the auto harness like a manual harness would be converted?
auto harness
Closer view of the ECU connectors.
What it should look like after the mod.
#2
RX-7 Bad Ass
iTrader: (55)
No reason you can't eliminate the extra wires. At this point the harness is pretty much a manual harness, just treat it as such.
Take your time and be VERY careful and thorough when weeding out a harness. Do it RIGHT - half-assed wiring here could mean a helluva time fixing the problem down the road.
Dale
Take your time and be VERY careful and thorough when weeding out a harness. Do it RIGHT - half-assed wiring here could mean a helluva time fixing the problem down the road.
Dale
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM