whinin

iTrader: (1)

I have tried to read the wiring harness diagram off rotaryheads but I can't find any of these color combinations anywhere. It is possible I am looking in the wrong direction though.

So I have a few of these and I would like to try and find out what the attach to.

These are all single spade connectors, one wire.

Off the same harness as the OMP, a black wire with red stripes.



Off the same harness as the transmission wires, a yellow/white wire.



These next ones are off a harness I left on the vehicle.
Black/Red



Grey/Red



All Blue (I think this is the starter solenoid switch wire)



Black/White



This last one is Black/Red but it is a double connector (only one wire)



Thank you for any help!

whinin

iTrader: (1)

Figured out 1st and 2nd picture. 1st is coolant level sensor, 2nd is rear iron coolant temperature sensor.

whinin

iTrader: (1)

Got it all.

caredden

iTrader: (148)

For help in future searches, it would be helpful if you list where they went