simplification achieved problems though :(
#1
Full Member
Thread Starter
iTrader: (3)
Join Date: Sep 2008
Location: Colorado Springs, Co
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
simplification achieved problems though :(
so i just finished the seq. simplification on my '93, and stupid me forgot to connect a coolant line. started it up and it spewed coolant everywhere. no biggy i got a new hose clamped it in, and started it back up. now there is white smoke billowing out the exhaust. i was wondering if that is the coolant burning off, or if it is a problem that has occured. my car is completely stock. running out to get some coolant now to replace lost coolant. thinking about taking it out for a drive.
#2
Full Member
Thread Starter
iTrader: (3)
Join Date: Sep 2008
Location: Colorado Springs, Co
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
smoke is gone must have been burning something off. took it for a drive and dont seem to have the power i should. i know i am runnind less boost since i dont have a boost controller, but with 7 psi i hould still be getting better pull out of the car. when i rev it while sitting still almost sounds like i have a BOV from escaping air. not sure if that means i have a vac leak or not. also still leaking coolant. looks like im tearing it down again if anyone ha any ideas as to what the problem might be i would like to hear their diagnosis.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM