Sidemarkers and Turn Signals
#1
Full Member
Thread Starter
Join Date: Nov 2001
Location: bay area, california
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Sidemarkers and Turn Signals
how do you remove the front lower sidemarkers? I can get one side off but not the other. its pretty annoying. it looks like the passenger side sidemarker needs to be unscrewed from within the wheel well but is that necessary? the driver's side pops off pretty easily.
and for the stock turn signals. how do you get rid of the orange inside? i did a search and someone said bake them then they pop right off. how long do you bake it and at what temperature? the little clips that keep the lens on don't want to come out. any advice/help would be MUCH appreciated! thanks!
and for the stock turn signals. how do you get rid of the orange inside? i did a search and someone said bake them then they pop right off. how long do you bake it and at what temperature? the little clips that keep the lens on don't want to come out. any advice/help would be MUCH appreciated! thanks!
#2
Rotary Freak
Clear up the front turn signals is easy. Just use a heat gun or baek the lights in the oven for a little bit to soften the glue; then pry them open. When you open it up you'll see the the anber colerd part is just held on by a screw. Unscrew it and take it out. I then used some silicon adhesive to seal them back up.
Heres a pic of them on my 7. https://www.rx7club.com/forum/showth...threadid=40398
Its the first and second pic that I posted.
Heres a pic of them on my 7. https://www.rx7club.com/forum/showth...threadid=40398
Its the first and second pic that I posted.
#3
Full Member
Thread Starter
Join Date: Nov 2001
Location: bay area, california
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
thanks zoomspeed. i guess i wasn't baking them long enough but i finally got the glue gooey enough to pull the lens out. still can't get the passenger sidemarker out thoe.
#4
Full Member
theres one screw you have to undo on the inside wheel well, it makes it very easy if you just remove the wheel and theres also a little plastic tab on the same side as the screw that you have to bend to allow it to be removed
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
Farkel
3rd Generation Specific (1993-2002)
4
09-16-15 06:16 PM