FYI: I did a search and didn't answer my question..

The other night, I did some WOT runs with Decels and
Revs in the Upper RPMS..(with GF driving behind)
to see if I could get some FLAMMAGE.. but no dice.
According to my GF she said she saw like a small
blueish flame like in the exhaust.. even if it was a
tiny blue flame, that isnt' what I want.. I want
" dont' **** with me, ill smoke your *** flammage"

After doing search, I believe Goodfella set his
PFC Decelerating fuel cut to 8K with Electrical
load. and supposedly get easy flammage..

So question #1.
What does the Decelerating fuel cut actually do?
Sorry not familiar with decelerating fuel cut..
I know what regular fuel cut is.

#2.
Not sure wht my Decel fuel cut is set at, but
if I change it to 8K RPM like good fella.
What wil i be telling the car to do??

#3.
Is the ABOVE good or bad????

#4.
Is this right??? TO make flammage.. WOT in upper
RPM range 6k-7.5K rpm. WOT then off gas. and
Idle just rev high enough that car boost then off
gas.. are theire any other ways?

MOD in SIG..

Thanks

 

you're basically dumping out a lot of fuel. i remember those days when rich did that, shooting flames was a lot of fun

 

I know it may be juevenile..
I just want to be able to do it.

Its like having a street bike and can't
ride a wheelie..

I already know how the flames are made.
Unburnt fuel with exhaust fuel..

My question is, " What is decelerating fuel cut??"
is it good or bad to use to make flames.. Using the
PFC..

 

Anyone???

come on flamers. speak up.. haha

 

i have no problems shooting flames right now, although i will add that i am not really TRYING to do it. everyone that i am friends with thinks that it is the coolest thing.....i am ordering a power fc in just a few weeks, and will get back to this thread. i would say that maybe you do need make sure that the car is getting the right amount of fuel. rich cars have a tendancy to ignite the extra rich exhaust when there is rapid/spirited acceleration and decelleration.......

 

There is an anti-lag feature on the FC-Datalogit (purchased seperately from the PVC) which is supposed to shoot flames. I don't plan on trying it, but it is supposed to work - maybe a search on anti-lag would give you these details