She's home after several weeks in the shop...
Thread Starter
Joined: Nov 2001
Posts: 3,568
Likes: 1
From: Lantana, Texas
She's home after several weeks in the shop...
I parked her in the garage last night for the first time in a while. She has gone from a beauty to a beautiful beast. I will hopefully have her tuned next week and then out to the track. A good friend of mine "Lee" did all the work "tearbo2" on the forum.
She fought him every inch of the way but when it was done he did a fantastic job.
We took her out last night to do some street tuning and she was screaming...it felt great when the T78 kicked in.
Here's a few pictures of her. One of the pictures looks a little off.

She fought him every inch of the way but when it was done he did a fantastic job.
We took her out last night to do some street tuning and she was screaming...it felt great when the T78 kicked in.
Here's a few pictures of her. One of the pictures looks a little off.

Thread Starter
Joined: Nov 2001
Posts: 3,568
Likes: 1
From: Lantana, Texas
Originally Posted by MakoRacing
niceee, is it on stock ports? what numbers you shootn for with the t78? keep up the good work 

425 to 450 at the wheels and 10.XX at the track...
Thread Starter
Joined: Nov 2001
Posts: 3,568
Likes: 1
From: Lantana, Texas
I have only driven her for about 30 minutes with the current setup. I planning on running about 17lbs of boost. Should be plenty safe. The power was coming on around 3000 rpms and was still pulling when I let off at 6000 rpms.
I will have a lot more information in about a week.
I will have a lot more information in about a week.
Trending Topics
very nice car! quick question... in your sig ((7th RX7 Best 12.3 @ 112.22 Stock Twins 11 psi))
what kind of power were you make'n when you did this and was it stock ports??
what kind of power were you make'n when you did this and was it stock ports??
Thread Starter
Joined: Nov 2001
Posts: 3,568
Likes: 1
From: Lantana, Texas
The car was last dynoed making around 285whp and stock ports.
The intercooler is the Greddy 3 row...
And yes the blanket is from Gotham Racing...
Thanks for all the compliments...I can't wait to get her fully tuned
The intercooler is the Greddy 3 row...
And yes the blanket is from Gotham Racing...
Thanks for all the compliments...I can't wait to get her fully tuned
man u must be a kick *** driver to cut a 12.3, my old on had all bolt ons BNR stage 2's at 13 psi and i could only get a 12.7 out of it. Guess a low compression motor plays into that, and a 2.4 0-60 ft.
Originally Posted by iceman4357
man u must be a kick *** driver to cut a 12.3, my old on had all bolt ons BNR stage 2's at 13 psi and i could only get a 12.7 out of it. Guess a low compression motor plays into that, and a 2.4 0-60 ft. 

Originally Posted by internal comsucktion engi
very nice car! quick question... in your sig ((7th RX7 Best 12.3 @ 112.22 Stock Twins 11 psi))
what kind of power were you make'n when you did this and was it stock ports??
what kind of power were you make'n when you did this and was it stock ports??
Originally Posted by fastrx7man
The intercooler is the Greddy 3 row...
Last edited by ROTARYFDTT; Jan 5, 2006 at 03:16 AM.
Joined: Mar 2004
Posts: 1,670
Likes: 0
From: King George, VA USA
I'm hoping to break into the 12's at all whenever I decide to take my FD to the track. I'm hesitant though, because of the rediculous heatsoak she's going to endure while waiting in the line or w/e...
:/
Not many mods to list here. Just intakes, down-pipe, catback, non-sequential. Though I do have a nice OS Giken twin-plate and I'm runnin 285's in the rear, at least I could get a good launch with that combo, no? I'm starting to dis-like my short-shifter though...too notchy.
:/
Not many mods to list here. Just intakes, down-pipe, catback, non-sequential. Though I do have a nice OS Giken twin-plate and I'm runnin 285's in the rear, at least I could get a good launch with that combo, no? I'm starting to dis-like my short-shifter though...too notchy.
Thread Starter
Joined: Nov 2001
Posts: 3,568
Likes: 1
From: Lantana, Texas
rotaryrider36...I believe it was Boostn7 that went 10.98 on stock twins. The motor was ported. I think his best was a 11.5X on stock twins and stock ports.
I am only going to be happy with 10's from this point forward...
I am only going to be happy with 10's from this point forward...
Originally Posted by fastrx7man
rotaryrider36...I believe it was Boostn7 that went 10.98 on stock twins. The motor was ported. I think his best was a 11.5X on stock twins and stock ports.
I am only going to be happy with 10's from this point forward...
I am only going to be happy with 10's from this point forward...
Thread
Thread Starter
Forum
Replies
Last Post
radiantRX-7
3rd Generation Specific (1993-2002)
18
Sep 15, 2015 07:04 AM







