3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Severe backfire under boost..... Help!!

Thread Tools
 
Search this Thread
 
Old 03-21-06, 11:04 AM
  #1  
Senior Member

Thread Starter
 
Recentlyconverted's Avatar
 
Join Date: Jul 2004
Location: East Coast
Posts: 468
Likes: 0
Received 0 Likes on 0 Posts
Severe backfire under boost..... Help!!

Hey Guys,

Ok, so here's the problem. I took my car in for emissions this morning, the car passed fine. But when I pulled the car out of the shop I noticed that any time I stepped on the gas, as soon as the turbos start to spool, the car starts machine gun backfiring. The car runs fine when it's off the turbos, but whenever I step on the gas, as soon as the turbos start to spool (as soon as the gauge goes past 0 heading into boost) the car starts machine gun backfiring and bucking quite a bit. I spoke to the guy at the shop, he said he hadn't done anything to the engine to get it to pass or anything, and I trust him on this, I am pretty sure he didn't do anything to get it to pass. But anyone have any idea what is wrong? the car idles fine and everything, but as soon as the turbos start to spool this problem happens. Any ideas guys???
Old 03-21-06, 11:13 AM
  #2  
I am becoming...

iTrader: (1)
 
Broken09's Avatar
 
Join Date: Jan 2003
Location: Montgomery, AL
Posts: 1,507
Likes: 0
Received 0 Likes on 0 Posts
check line to map sensor
Old 03-21-06, 11:14 AM
  #3  
ArmitageFD3S

iTrader: (13)
 
ArmitageGVR4's Avatar
 
Join Date: Oct 2002
Location: Herndon, Virginia
Posts: 2,238
Received 23 Likes on 15 Posts
I'm really a know-nothing when it comes to these cars, but if you're backfiring under boost it means you're not burning all the fuel that's being shot in when the ecu sees elevated pressure levels. Check your plug wires and coils. Maybe the emissions guy was rooting around in there to find a good signal and knocked something loose.

Originally Posted by Recentlyconverted
Hey Guys,

Ok, so here's the problem. I took my car in for emissions this morning, the car passed fine. But when I pulled the car out of the shop I noticed that any time I stepped on the gas, as soon as the turbos start to spool, the car starts machine gun backfiring. The car runs fine when it's off the turbos, but whenever I step on the gas, as soon as the turbos start to spool (as soon as the gauge goes past 0 heading into boost) the car starts machine gun backfiring and bucking quite a bit. I spoke to the guy at the shop, he said he hadn't done anything to the engine to get it to pass or anything, and I trust him on this, I am pretty sure he didn't do anything to get it to pass. But anyone have any idea what is wrong? the car idles fine and everything, but as soon as the turbos start to spool this problem happens. Any ideas guys???
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
djSL
The Bad & Fugly Businesses
24
09-21-17 03:09 AM
cooldude
West RX-7 Forum
5
10-03-15 09:17 PM
Jmpabon93
New Member RX-7 Technical
1
09-30-15 04:57 PM
BLUE TII
Single Turbo RX-7's
10
09-26-15 10:12 PM
ChanBagz
2nd Generation Specific (1986-1992)
6
09-17-15 03:36 PM



Quick Reply: Severe backfire under boost..... Help!!



All times are GMT -5. The time now is 12:10 PM.