3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Seriously nigly oil leak please help

Thread Tools
 
Search this Thread
 
Old Sep 13, 2013 | 06:44 PM
  #1  
Bryce moser's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2013
Posts: 17
Likes: 0
From: New Zealand
Exclamation Seriously nigly oil leak please help

Hey guys as title suggests i have a very annoying oil leak, now I have located the area that it is coming from but I don't think it could be in a worse spot it seems to be under the power steering pump but above the spark plugs height right at the front somewhere
There appears to be alot of gasket sealer smeared around in there so I take it it's been under lying for a while and I hadn't picked up on it

My engine was only built 10k ago so it's a bit confusing

D
Has anyone had a leak here before or have a suggestion as to what it may be??
It's in such a tight spot it's hard to see let alone get to

Any help is very greatly appreciated
Thanks in advance
Reply
Old Sep 13, 2013 | 08:37 PM
  #2  
jayscoobs's Avatar
Senior Member
iTrader: (8)
 
Joined: Jul 2011
Posts: 588
Likes: 2
From: Bay Area, CA
The only things there that can leak oil is oil level sensor gauge on oil pan, also under A/C there a spot where the oil cooler hardline turns into rubber and maybe it ruptured but highly unlikely because those hoses are thick. Last spot is where oil filler neck meets the block.
Reply
Old Sep 13, 2013 | 08:40 PM
  #3  
K-Tune's Avatar
FD Daily
Tenured Member: 20 Years
iTrader: (27)
 
Joined: Jul 2003
Posts: 3,308
Likes: 14
From: Gulf Breeze, FL
Could be a cracked front dowel seat.
Reply
Old Sep 13, 2013 | 10:47 PM
  #4  
Bryce moser's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2013
Posts: 17
Likes: 0
From: New Zealand
Iv removed alternator and power steering pump it seems to be coming from between the front cover and the plate so I'm guessing it hasn't been sealed properly as there is gasket sealer spread all over the area .
Is the oil level sensor a fairly large wire almost like an earth wire going onto a 10 mil bolt
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM
sypath
3rd Generation Specific (1993-2002)
2
Aug 16, 2015 12:06 AM




All times are GMT -5. The time now is 01:33 PM.