secondary turbo issue after clutch, downpipe and midpipe install
#1
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Port Charlotte, FL
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
secondary turbo issue after clutch, downpipe and midpipe install
Ok so i need some help here....i just did a cluth install with a intake and a dp/mp....now after testing everything on a road test it seems as if the sencond turbo isnt even working...what would cause this?....also there is a hose that seems to go from above the turbo and connects to the stock cat where it is welded in..what is this pipe? what do u do when u remove stock cat and have no place to put it? block it off? just let it hang there? it makes some wierd noise when u let off the accelerator....im lost on this one PLEASE HELPPPPP
#2
Rx7 Wagon
iTrader: (16)
thats the air pump to the catalytic converter. it moos. you can leave it hanging. search for creative solutions to eliminating the moo or removing the air pump altogether. i have no idea why your secondary turbo isnt working. you likeley misplaced a line in reassembly or a check valve is bad. search!
#3
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Port Charlotte, FL
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
hmmm i checked everything twice....would it be an intake hose that was misplaced or something else..the 2nd turbo was working before the clutch install...im soo confused on this damnit...lol thanks though...any other suggestions would be awesome
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM