anees

iTrader: (6)

hi guys
i am also planning to order 850cc sard inj so i cann run 850cc all around
now the question is
will they fit fine in the primary rail
on rhdjapan .. it says that nippondenso makes these inj and they are drop in replacements

pls let me knoe what you guys think and will it fit jus fine or do i also need to replace the primary rail
thanx
anees

RotaryEvolution

iTrader: (30)

or put another set of OE secondaries into the primary rail with an additional o-ring?

Brodie121

iTrader: (8)

I'm rather certain they are just stock secondaries that have been re-branded.

anees

iTrader: (6)

Yea as long as thy fit fine in primary rail w/o any modification i am good

Mahjik

iTrader: (1)

You have to do something to fit 850's in the stock primary rail. You either need to mill it down or use an extra o-ring as pointed out by Karack.

mono4lamar

iTrader: (32)

The proper procedure is to mill the rail. I can provide the service for you if you're looking to have it done. PM if if you can't get it done otherwise...