3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Rx7 weigh reduction guide?

Thread Tools
 
Search this Thread
 
Old 08-31-14, 04:55 PM
  #1  
Meister
Thread Starter
iTrader: (1)
 
sypath's Avatar
 
Join Date: Nov 2013
Location: Sweden
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Rx7 weigh reduction guide?

I wonder if there is any weight reduction guide for the fd? Ive searched but couldnt find any tips on what to remove

Thanks!
Old 08-31-14, 08:43 PM
  #2  
F'n Newbie...

iTrader: (6)
 
fendamonky's Avatar
 
Join Date: Sep 2006
Location: Nokesville, Va
Posts: 3,928
Received 313 Likes on 228 Posts
If you aren't building a full on, stripped down, race car than I really wouldn't fret over it that much... The FD is already a pretty light car, stripping it down further purely for the sake of weight will be sacrificing comfort for rather minimal gains.

An empty tank of gas vs a full tank of gas will net similar results (120lbs).

But... you can strip out the A/C, the PS, the ABS and trade the stock twins for a single. That'll save you some decent weight.. strip out the plastic interior, remove the carpets and all the sound-deadening material as well.
Old 08-31-14, 10:57 PM
  #3  
Do a barrel roll!

iTrader: (4)
 
Rxmfn7's Avatar
 
Join Date: Oct 2001
Location: Lower Burrell, PA
Posts: 7,529
Likes: 0
Received 2 Likes on 2 Posts
https://www.rx7club.com/3rd-generati...u-done-907142/
Old 09-01-14, 07:33 AM
  #4  
Constant threat

 
bajaman's Avatar
 
Join Date: Jul 2001
Location: near Wichita, Kansas
Posts: 4,952
Received 35 Likes on 31 Posts
^ This.
Old 09-01-14, 08:10 AM
  #5  
All out Track Freak!

iTrader: (263)
 
Fritz Flynn's Avatar
 
Join Date: Jul 2001
Location: Charlottesville VA 22901
Posts: 10,672
Received 412 Likes on 250 Posts
Stock Component Difference Est Car Weight Modification
Air Conditioning -30 2759 Remove Compressor/Condensor/Heater core and all piping
Air Pump -12 2747 Remove
Down Pipe Cats -15 2732 Strait Pipe any
Mid pipe Cats -15 2717 Resonated Pipe any
Muffler -5 2712 Aftermarket any
Emissions piping -5 2707 Remove/block
Twin Turbo plumbing -5 2702 Remove/non Seq
Pulley Kit -3 2699 Unorthodox Racing
Power Steering -20 2679 Mavil Manual Rack
Headlights -10 2669 Evo R/RE-A
Fog Lights -5 2664 Remove
Carpet -30 2634 Remove
Dash -36 2598 Single Panel 3/32 alum
Battery -15 2583 Oddessy
Seats -40 2543 Recaro Profi SPG
Windscreen -15 2528 Lexan - any
Rear Glass -10 2518 Lexan - FAL
Side Glass -20 2498 Remove
Hood -1 2497 Chargespeed
Hatch -10 2487 Chargespeed
Doors -25 2462 Gut/Remove interior panel Power Locks/Windows
Fenders -2 2460 Chargespeed/Any Carbon
Steering Wheel -8 2452 Momo 330mm alcantra + quick release
Air Bag Sensors -10 2442 Remove
Front Bumper Reinforcement -10 2432 Hole Saw (50% of area removed)
Rear Bumper Reinforcement -10 2422 Hole Saw (50% of area removed)
Sound Deadening -25 2397 Dry Ice + Rubber Mallet/Scraper
Gas Tank -20 2377 ATL Aluminum enclosed fuel cell
Spare Tire/Toolkit/jack -20 2357 Remove
Interior pipe threading and brackets -5 2352 Drill/Angle grinder/Sawzall all mounts for interor panels/speakers/etc
Aluminum Panel Bolts -2 2350 Fastner express - 43% weight savings on all heatshield/body panel bolts
Hole Saw to non stressed interior panels -15 2335 front of strut towers, rear of strut towers, speaker surrounds
Clutch -3 2332 Aftermarket any
Flywheel -5 2327 Aftermarket any
Driveshaft -4 2323 ACPT Carbon Fiber Driveshaft
Sunroof -17 2306 Ronin Speedworks - Carbon/Carbon
TI Lug Nuts -1 2305 Aftermarket any - very expensive
Headliner -5 2300 Remove
Sun Visors -3 2297 Remove
Wiring Harness -8 2289 Simplify - Single turbo
Windshield Wiper/Coolant resevior -5 2284 Remove
Interior Plastic -35 2249 Remove
Side Mirrors -6 2243 APR GT3
Radio/Antenna/Wiring/Speakers -20 2223 Remove
Undercoating -4 2219 Remove - Heat gun + Scraper + sanding and lightly re-coat with Rhino Liner or Linex for about 30% reduction in weight.

One of these days I'll get actual accurate weights of most of the stuff on this list
Old 09-01-14, 08:31 AM
  #6  
All out Track Freak!

iTrader: (263)
 
Fritz Flynn's Avatar
 
Join Date: Jul 2001
Location: Charlottesville VA 22901
Posts: 10,672
Received 412 Likes on 250 Posts
Typical light weight base model FD is about 2750 and you can loose 100 pretty easy

Full exhaust -40 (DP, MP and RB single tip)
No airpump etc..... -12
Everything blocked off and simplified sequential -2
Spare tire removed along with rear deck carpet -27
Small battery -15
LTW flywheel -5
99 steering wheel -2

Above mods which are easy to do and pretty standard should net about 100 pounds savings

For track cars or hardcore street guys PS and AC will take out another 50 pounds
Old 09-02-14, 02:59 PM
  #7  
Meister
Thread Starter
iTrader: (1)
 
sypath's Avatar
 
Join Date: Nov 2013
Location: Sweden
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the replies guys!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wicked93gs
Other Engine Conversions - non V-8
0
08-23-15 10:14 AM



Quick Reply: Rx7 weigh reduction guide?



All times are GMT -5. The time now is 01:26 AM.