How is the fiment on these? I purchased a resonated midpipe from rx7store last time and it fit like a square peg in a round hole. I'm going to weld a random metallic cat in the midpipe and bolt apexi dual n1's to the back. If anyone wants to tell me what im about to do wont work, now is a great time.

Thankyou all,
Barban.

 

You had issues with our resonated pipe? That is the first I have heard of that. What downpipe were you using?

Jason

 

I had issues with both the resonated midpipe and downpipe in the past. I also took pictures and sent them to you, Jason. I want to swap out my Pettit resonated mp for one of the ones that you sell but I'm hesitant becuase I don't trust that your supplier has changed the flange measurements to make sure they fit.

 

Perfect fit

 

My rx-7 store DP fit just fine

 

My midpipe from rx7 store fit not great but decent. It took a little bit of pulling and tighting but hey... its aftermarket... deal with it.

 

The resonated mid-pipe I just got from the rx7store fit great. The diff brace...different story.

 

I have no clue who made the downpipe and probably never will. Thats one reason why im replacing all of it. Only one of the correctly sized bolts would fit so I had to ude a much smaller bolt on the other side crearting an eventual exhaust leak(not that you can hear it anytime besides idle . It was a flange problem, the flange appeared to be clocked slightly wrong and a it was a little smaller. But that shouldnt be a problem if both flanges come from the same manufacturer and are made for eachother. I'm mostly worried about how the N1 mates up to it.

 

I am running the Gotham downpipe and the rx7store midpipe with no issues at all.