RX7 R1 - 500 WHP Build Up
12-04-06, 02:54 AM
#1
still 1.3 liter v8 eater
Thread Starter
Join Date: Sep 2006
Location: San Diego, CA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
RX7 R1 - 500 WHP Build Up
Aiming for 500WHP from a GT3540R .82 A/R
***Copy and paste info here... dont link it***
As you all know... Jeremy (RotorMotor2) and I are rebuilding my motor. I suspect the apex seal in the front rotor went out (go figure). If you have 1 apex seal out, then it will read low or no compression in 2 of the chambers. If you have a side seal out, then it will only read low on 1 of the chambers. for instance, if it reads 0-0-80 on your back rotor and 80-80-80 on your front rotor, you have a blown apex seal in your back rotor. If it reads 0-80-80 on your back rotor and 80-80-80 on your front, you have a bad side seal in your back rotor. The numbers are an example, and they can be different between rotors, but usually its low, or none at all.
My apex seal went out on my front rotor and my compression was reading 30-30-80, which is a sign of a bad apex seal. We just started on it yesterday, and i am attaching some pics.
My old setup had about 420 WHP, and now I am aiming for 500 WHP, or more with the new setup and some other stuff.
You will see the scratches on the rotor housing and the broken apex seal. The seal broke in 2 different places, and im lucky it diddnt score the intermediate housing.
Stuff changed:
Rotary Aviation Super Seals (Nitrate Coated)
Brand new rotor housing from Mazda
Modifications:
Garrett GT3540R Turbo
Rotary Extreme VMount Intercooler
JPRO Exhaust Manifold
APEXi PowerFC
HKS Twin Power Ignition
TiAL 44mm Wastegate
GReddy EVO2 Turboback
GReddy Downpipe
1300cc Sec. Injectors
Walbro Fuel 255lph Pump
ACT Clutch and flywheel
TiAL BOV
GReddy elbow
GReddy Profec B SpecII Boost Controller
TEIN Super Street 16 way adjustable damper/coil overs
Garrett GT3540R Specs:
Turbine Wheel Diameter: 64mm
Turbine trim: 84
Turbine A/R: .82
Turbine Outlet: T4 3" Outlet VBAND
Compressor Wheel Diameter: 82mm
Compressor trim: 56
Compressor A/R: .70
Type: Free Float
Twin Ball Bearing
The Turbo was thought to be a Garrett GT3040R, but its not. Its a GT3540R
***Copy and paste info here... dont link it***
As you all know... Jeremy (RotorMotor2) and I are rebuilding my motor. I suspect the apex seal in the front rotor went out (go figure). If you have 1 apex seal out, then it will read low or no compression in 2 of the chambers. If you have a side seal out, then it will only read low on 1 of the chambers. for instance, if it reads 0-0-80 on your back rotor and 80-80-80 on your front rotor, you have a blown apex seal in your back rotor. If it reads 0-80-80 on your back rotor and 80-80-80 on your front, you have a bad side seal in your back rotor. The numbers are an example, and they can be different between rotors, but usually its low, or none at all.
My apex seal went out on my front rotor and my compression was reading 30-30-80, which is a sign of a bad apex seal. We just started on it yesterday, and i am attaching some pics.
My old setup had about 420 WHP, and now I am aiming for 500 WHP, or more with the new setup and some other stuff.
You will see the scratches on the rotor housing and the broken apex seal. The seal broke in 2 different places, and im lucky it diddnt score the intermediate housing.
Stuff changed:
Rotary Aviation Super Seals (Nitrate Coated)
Brand new rotor housing from Mazda
Modifications:
Garrett GT3540R Turbo
Rotary Extreme VMount Intercooler
JPRO Exhaust Manifold
APEXi PowerFC
HKS Twin Power Ignition
TiAL 44mm Wastegate
GReddy EVO2 Turboback
GReddy Downpipe
1300cc Sec. Injectors
Walbro Fuel 255lph Pump
ACT Clutch and flywheel
TiAL BOV
GReddy elbow
GReddy Profec B SpecII Boost Controller
TEIN Super Street 16 way adjustable damper/coil overs
Garrett GT3540R Specs:
Turbine Wheel Diameter: 64mm
Turbine trim: 84
Turbine A/R: .82
Turbine Outlet: T4 3" Outlet VBAND
Compressor Wheel Diameter: 82mm
Compressor trim: 56
Compressor A/R: .70
Type: Free Float
Twin Ball Bearing
The Turbo was thought to be a Garrett GT3040R, but its not. Its a GT3540R
Last edited by GregFD3S; 12-04-06 at 06:44 AM.
12-04-06, 03:47 AM
#3
still 1.3 liter v8 eater
Thread Starter
Join Date: Sep 2006
Location: San Diego, CA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx7bomex
is this the gt3540r u scammed me for 950.00 dollars with
Dont even start up again, because this is how you got BANNED from THIS SITE to begin with.
12-04-06, 03:53 AM
#5
still 1.3 liter v8 eater
Thread Starter
Join Date: Sep 2006
Location: San Diego, CA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx7bomex
no i got banned for the bad language i wont loose my temper again just highlight ur lies
we both know those screenshots are bogus paypal have confirmed that numerous times
we both know those screenshots are bogus paypal have confirmed that numerous times
I made a prompt refund, please stop harassing me. I am a small business owner and I dont make money ripping people off.
You keep on doing this, i am about to forward your username to an administrator and they will see that you signed up under 2 different usernames.
Administrators ban you for a reason.
Trending Topics
12-04-06, 04:10 AM
#8
Full Member
Join Date: Dec 2006
Location: uk
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Resolution Centre – Claim Details Return to Resolution Centre
--------------------------------------------------------------------------------
We have completed our investigation of this case. We attempted to process a refund from the seller's account to your account. Unfortunately, the seller's account does not contain the funds necessary to cover this refund. We were able to recover $0.00 USD. We have taken action against the seller and are working to recover the remainder of your refund. We will contact you when we have more information. No further action is required of you at this time.
Non-receipt – Case ID: PP-198-739-902
Status: Case Closed
Transaction ID: 75D46601C5548583Y
Seller Name & Email: DCTuner.com Sales, forcefedintegra@gmail.com
Transaction Amount: -$950.00 USD
Transaction Date: 3 Aug. 2006
lifted from paypal account
--------------------------------------------------------------------------------
We have completed our investigation of this case. We attempted to process a refund from the seller's account to your account. Unfortunately, the seller's account does not contain the funds necessary to cover this refund. We were able to recover $0.00 USD. We have taken action against the seller and are working to recover the remainder of your refund. We will contact you when we have more information. No further action is required of you at this time.
Non-receipt – Case ID: PP-198-739-902
Status: Case Closed
Transaction ID: 75D46601C5548583Y
Seller Name & Email: DCTuner.com Sales, forcefedintegra@gmail.com
Transaction Amount: -$950.00 USD
Transaction Date: 3 Aug. 2006
lifted from paypal account
12-04-06, 04:10 AM
#9
still 1.3 liter v8 eater
Thread Starter
Join Date: Sep 2006
Location: San Diego, CA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by wan
I think this thread needs a 
12-04-06, 04:27 AM
#11
still 1.3 liter v8 eater
Thread Starter
Join Date: Sep 2006
Location: San Diego, CA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx7bomex
i dont think i can be banned for replying to ur request to post proof i will not become abusive again
12-04-06, 04:46 AM
#13
still 1.3 liter v8 eater
Thread Starter
Join Date: Sep 2006
Location: San Diego, CA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by eivad1
hey 1.3 who did the motor for your fd and btw nice set up from what im reading
my friend and I (rotormotor2) are doing the motor build up. Hopefully we get done tomorrow or tuesday because thats my daily driver
12-04-06, 05:43 AM
#14
still 1.3 liter v8 eater
Thread Starter
Join Date: Sep 2006
Location: San Diego, CA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
crap, i just noticed that the pic URLs are dynamic so nobody can see them. I could see them for some reason, probably because its cached in my browser.
anyways, heres some pics
you can see the broken apex seal and scored rotor housing. There are more pics at the link
anyways, heres some pics
you can see the broken apex seal and scored rotor housing. There are more pics at the link
12-04-06, 06:02 AM
#18
still 1.3 liter v8 eater
Thread Starter
Join Date: Sep 2006
Location: San Diego, CA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx7bomex
the 950.00 dollars he scammed me for should help him along
12-04-06, 06:14 AM
#23
still 1.3 liter v8 eater
Thread Starter
Join Date: Sep 2006
Location: San Diego, CA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx7bomex
you will be posting from the county lock up soon u might even find a husband in there
im not paying you more money, show me some damn proof that I went out of my way to steal money from you!
12-04-06, 06:22 AM
#24
Full Member
Join Date: Dec 2006
Location: uk
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
ok pinnochio i am unable to get screenshot but i have posted the invoice before u altered it i have posted the confirmation from paypal that no refund has taken place
i will email paypal and fwdd the reply and post it confirming exactly as they have done on numerous occassions that no refund has ever passed through your account
you know you are not telling the truth and are just trying a damage limitation exercise
anyone with half a brain will realise i wouldnt go to all this trouble to fraudently obtain money by deception which would leave me liable for prosecution
i paid in good faith and u abused that trust and have sought to cover your tracks.you have claimed paypal have the money which should be of interest to them
i will email paypal and fwdd the reply and post it confirming exactly as they have done on numerous occassions that no refund has ever passed through your account
you know you are not telling the truth and are just trying a damage limitation exercise
anyone with half a brain will realise i wouldnt go to all this trouble to fraudently obtain money by deception which would leave me liable for prosecution
i paid in good faith and u abused that trust and have sought to cover your tracks.you have claimed paypal have the money which should be of interest to them
12-04-06, 06:29 AM
#25
still 1.3 liter v8 eater
Thread Starter
Join Date: Sep 2006
Location: San Diego, CA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx7bomex
ok pinnochio i am unable to get screenshot but i have posted the invoice before u altered it i have posted the confirmation from paypal that no refund has taken place
i will email paypal and fwdd the reply and post it confirming exactly as they have done on numerous occassions that no refund has ever passed through your account
you know you are not telling the truth and are just trying a damage limitation exercise
anyone with half a brain will realise i wouldnt go to all this trouble to fraudently obtain money by deception which would leave me liable for prosecution
i paid in good faith and u abused that trust and have sought to cover your tracks.you have claimed paypal have the money which should be of interest to them
i will email paypal and fwdd the reply and post it confirming exactly as they have done on numerous occassions that no refund has ever passed through your account
you know you are not telling the truth and are just trying a damage limitation exercise
anyone with half a brain will realise i wouldnt go to all this trouble to fraudently obtain money by deception which would leave me liable for prosecution
i paid in good faith and u abused that trust and have sought to cover your tracks.you have claimed paypal have the money which should be of interest to them