RX7 Mods
#1
Newbie
Thread Starter
Join Date: Oct 2002
Location: NJ
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RX7 Mods
Hi all! I am getting a 3rd gen RX7 pretty soon and my goal is to have it run 12 flat with no NO2. How much $$ in mods is it gonna cost me to do this? and which mods(brand names, examples) do u think are best. thx for ur help
#2
i guess first off, get a FD3S first, then you can see how much money you have left for mods. But in any case. 12flat isn't 'that' hard. You need some really good tires, full exhaust, intake, Power FC (ECU), larger secondary injectors, intercooler upgrade, and run about 14psi on the stock twins. Oh yeah, add a good ACT clutch in there. Total cost? more than 4000 bucks for parts...labor....no clue.
Danny
Danny
#3
Senior Member
Join Date: Feb 2002
Location: Southern California-Glendale
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
I'd just save a little more and go with a single turbo.
But to answer your question I'd go with...
Apex'i Intake
M2 downpipe
cb exhaust
Apex'i Power FC
midpipe
IC-front mount
Fuel pump
and 14 lbs of boost...street port wouldn't hurt
Oh yeah, and it'll run you around 4g's in parts...probably another 500-700 in labor
But to answer your question I'd go with...
Apex'i Intake
M2 downpipe
cb exhaust
Apex'i Power FC
midpipe
IC-front mount
Fuel pump
and 14 lbs of boost...street port wouldn't hurt
Oh yeah, and it'll run you around 4g's in parts...probably another 500-700 in labor
Thread
Thread Starter
Forum
Replies
Last Post
thecody59
1st Generation Specific (1979-1985)
40
08-23-15 06:41 PM
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM