3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Running problems

Old Dec 5, 2006 | 03:12 PM
  #1  
playasyougo's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2005
Posts: 6
Likes: 0
From: Edinburgh
Running problems

Hi, I have a 1992 FD import which is standard. I started it the other day and it was running quite rough and putting out dark smoke from the exhaust. The car had ran out of petrol before i started it so this happened after filling it up with a petrol can. I think the fuel filter might be bloacked and i've cleaned the dirty spark plugs up but there was no change.

Also, my friend said the very centre of the backbox was glowing red when he passed me in his car. Is this normal?

Reply
Old Dec 5, 2006 | 03:19 PM
  #2  
dis1's Avatar
www.silverbulletrx7.com
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 940
Likes: 1
From: Gaithersburg, Md
Are the plugs wet when you take them out? If so you are running rich, maybe in limp mode. Check the pressure sensor near the oil filter.
Reply
Old Dec 5, 2006 | 03:22 PM
  #3  
playasyougo's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2005
Posts: 6
Likes: 0
From: Edinburgh
Originally Posted by dis1
Are the plugs wet when you take them out? If so you are running rich, maybe in limp mode. Check the pressure sensor near the oil filter.
The plug tips were not wet, just really dirty with carbon. I cleaned them all up before i put them back in but im replacing them all with new items tomorrow along with a new fuel filter.

Can anybody please tell me where to locate the fuel filter and pressure sensor before i go searching?

Does anynody know where to look for manuals for the FD online?

Thanks!

Reply
Old Dec 7, 2006 | 11:52 AM
  #4  
playasyougo's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2005
Posts: 6
Likes: 0
From: Edinburgh
Just thought i would let people know that it turned out to be the hose from the MAP sensor to the inlet manifold, it had come off !!

Running fine now !
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
Rotospectre
New Member RX-7 Technical
3
Mar 28, 2018 03:33 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:12 AM.