3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

rough start / miss fire when warm

Thread Tools
 
Search this Thread
 
Old Oct 15, 2006 | 01:02 AM
  #1  
racerrex90's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
 
Joined: Jan 2005
Posts: 64
Likes: 0
From: Ramstein AB, Germany
rough start / miss fire when warm

I've tried searching the forum for anyone with a similar prob and came up empty. Here's the deal... my FD began to have a rough idle when starting. i installed new NGK sparkplugs and magnacore wires and it seemed to disappear after the first run. gradually it began to have the same problem and now I notice that it usually starts fine when the motor is cold but returns to rough idle at start after engine is warm. Also I noticed that it runs good after idle smooths out but engine seems to miss in diff spots of the rpm range once it's warm.

I can drive it without probs if I don't accelerate fast. I'm guessing that I might need new coil packs or something else dealing with the ignition system. i'm out of ideas and about ready to take it to a mechanic.

Any ideas before I fork over cash to an expert?
Reply
Old Oct 18, 2006 | 10:19 PM
  #2  
racerrex90's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
 
Joined: Jan 2005
Posts: 64
Likes: 0
From: Ramstein AB, Germany
Any thoughts on my probs? I spoke with a friend/mechanic and he seems to think it's my EGR valve getting stuck.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1993fd3sracer1
3rd Generation Specific (1993-2002)
29
Oct 13, 2015 01:57 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
Sep 7, 2015 11:50 AM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
zuesskroph
2nd Generation Specific (1986-1992)
0
Aug 13, 2015 06:05 PM
Wolf_
Single Turbo RX-7's
3
Aug 11, 2015 04:23 PM




All times are GMT -5. The time now is 11:08 AM.