Rotary Seals???
05-27-03, 03:04 PM
#1
Junior Member
Thread Starter
Join Date: May 2003
Location: Detroit
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Rotary Seals???
I just got into the RX7 and I have been hearing people at my local race spot talking about Apex Seals.
Are these good seals?Are there better ones?Does the seals make the car more reliable?Tell me what you think or know about the seals.Also if rotary engines blow to quickly what goes on them?THANX
Are these good seals?Are there better ones?Does the seals make the car more reliable?Tell me what you think or know about the seals.Also if rotary engines blow to quickly what goes on them?THANX
05-27-03, 03:09 PM
#2
Full Member
Join Date: Jan 2003
Location: tracy california
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
heelllooooo newbie 
but the apex seals do the same function that piston rings do... someone is bound to post that link to rotary engines illustrated.... i jus dont have it 
ooh and there are diff sizes... or i should say widths... 2mm and 3mm... also they come in ceramic if u got the big bucks
but as far as them being "apex" seals... its jus what they are called... because they are on the "apex" of the rotor
but the apex seals do the same function that piston rings do... someone is bound to post that link to rotary engines illustrated.... i jus dont have it ooh and there are diff sizes... or i should say widths... 2mm and 3mm... also they come in ceramic if u got the big bucks
but as far as them being "apex" seals... its jus what they are called... because they are on the "apex" of the rotor
Last edited by Dougie_fresh_007; 05-27-03 at 03:18 PM.
05-27-03, 03:51 PM
#3
Junior Member
Thread Starter
Join Date: May 2003
Location: Detroit
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Dougie_fresh_007
heelllooooo newbie but the apex seals do the same function that piston rings do... someone is bound to post that link to rotary engines illustrated.... i jus dont have it
ooh and there are diff sizes... or i should say widths... 2mm and 3mm... also they come in ceramic if u got the big bucks
but as far as them being "apex" seals... its jus what they are called... because they are on the "apex" of the rotor
heelllooooo newbie
but the apex seals do the same function that piston rings do... someone is bound to post that link to rotary engines illustrated.... i jus dont have it ooh and there are diff sizes... or i should say widths... 2mm and 3mm... also they come in ceramic if u got the big bucks
but as far as them being "apex" seals... its jus what they are called... because they are on the "apex" of the rotor
05-27-03, 03:56 PM
#5
Banned. I got OWNED!!!
Join Date: Apr 2002
Location: St Louis
Posts: 883
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post