Rotary Extreme Twin Turbo Track V-mount Kit - Preliminary Review
#51
Registered User
iTrader: (6)
Boost response seems damn near instantaneous but I did the V-mount, synaptic DV, and the upgraded solenoids at the same time, so its like a perfect storm of responsiveness mods.
Just remembered, the only fitment issue was that my current strut tower bar didn't clear the new secondary turbo intake pipe, but considering that the kit wasn't built on my car everything else went together great.
Just remembered, the only fitment issue was that my current strut tower bar didn't clear the new secondary turbo intake pipe, but considering that the kit wasn't built on my car everything else went together great.
On my site you can see it clears with the stock R1 bar.
Thanks for your feed back.
#55
Eats, Sleeps, Dreams Rotary
iTrader: (52)
For your situation, it's weighing the options I guess. Either way, you can't go wrong with Rotary Extreme!!
#58
Registered User
iTrader: (6)
Thanks XLR8 for the kind words.
This kit also will receive the new angle for my vm kits and a little less silicone.
6 month wait, well Im actually considering closing until all work is finished that's back logged. Even all the little orders takes time away from vm building.
Its a lot for 1 guy doing this as a part time business.
This kit also will receive the new angle for my vm kits and a little less silicone.
6 month wait, well Im actually considering closing until all work is finished that's back logged. Even all the little orders takes time away from vm building.
Its a lot for 1 guy doing this as a part time business.
#59
Full Member
iTrader: (3)
Join Date: Feb 2002
Location: San Francisco
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Thanks XLR8 for the kind words.
This kit also will receive the new angle for my vm kits and a little less silicone.
6 month wait, well Im actually considering closing until all work is finished that's back logged. Even all the little orders takes time away from vm building.
Its a lot for 1 guy doing this as a part time business.
This kit also will receive the new angle for my vm kits and a little less silicone.
6 month wait, well Im actually considering closing until all work is finished that's back logged. Even all the little orders takes time away from vm building.
Its a lot for 1 guy doing this as a part time business.
#60
Registered User
iTrader: (6)
I have to finish my backlog, Ive already tarnished my name by taking on more then I can chew at one time....
I think no new orders will be taken until 2014, that's how much work I have.... Hand to forehead.
I know we talked about some type of pricing but if you really wait that long you know I will give you some type of break. But I'll finish my work first.
Atleast Im honest about my situation....
I hate when I don't know whats going on with my stuff, Id rather know that the guy has his head in his *** and get back to me then to not know nothing at all...lol
I think no new orders will be taken until 2014, that's how much work I have.... Hand to forehead.
I know we talked about some type of pricing but if you really wait that long you know I will give you some type of break. But I'll finish my work first.
Atleast Im honest about my situation....
I hate when I don't know whats going on with my stuff, Id rather know that the guy has his head in his *** and get back to me then to not know nothing at all...lol
#61
Full Member
iTrader: (3)
Join Date: Feb 2002
Location: San Francisco
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
I have to finish my backlog, Ive already tarnished my name by taking on more then I can chew at one time....
I think no new orders will be taken until 2014, that's how much work I have.... Hand to forehead.
I know we talked about some type of pricing but if you really wait that long you know I will give you some type of break. But I'll finish my work first.
Atleast Im honest about my situation....
I hate when I don't know whats going on with my stuff, Id rather know that the guy has his head in his *** and get back to me then to not know nothing at all...lol
I think no new orders will be taken until 2014, that's how much work I have.... Hand to forehead.
I know we talked about some type of pricing but if you really wait that long you know I will give you some type of break. But I'll finish my work first.
Atleast Im honest about my situation....
I hate when I don't know whats going on with my stuff, Id rather know that the guy has his head in his *** and get back to me then to not know nothing at all...lol
#64
Full Member
iTrader: (3)
V mount install
CAn anyone here point me into the direction of the correct install of this kit? this is all a received when i had bought it but no instructions were included so im just a little weary to install without some help
where the hell do i even start?
bend the A/C condenser?
where do the brackets even mount?
am i missing brackets?
P.S. this is supposedly a rotary extreme kit
Many thanks
where the hell do i even start?
bend the A/C condenser?
where do the brackets even mount?
am i missing brackets?
P.S. this is supposedly a rotary extreme kit
Many thanks
#65
I called Ben earlier this afternoon, weird this thread this got bumped today.
Start with the radiator and radiator brackets. The angle of your radiator is wrong, are you missing the rack (for lack of a better term; two o'clock in your first picture with the two bolts)? The top of the radiator bolts to a bracket on that rack. The bottom of the radiator mounts to the tow hook brackets. Not sure about A/C installation. Intercooler is pretty straight forward off the elbow and y-pipe, with a bracket bolting next to the hood latch.
You may be missing a few brackets. Contact the seller and ask for pictures of his kit installed and confirm that you have everything you need.
You can check out this thread for some pics of my installation.
That looks like a Rotary Extreme kit. Ben from RE is really helpful and knows these kits inside and out, shoot him a PM.
Feel free to PM me if you have any questions as you try to piece it together. Good luck!
Start with the radiator and radiator brackets. The angle of your radiator is wrong, are you missing the rack (for lack of a better term; two o'clock in your first picture with the two bolts)? The top of the radiator bolts to a bracket on that rack. The bottom of the radiator mounts to the tow hook brackets. Not sure about A/C installation. Intercooler is pretty straight forward off the elbow and y-pipe, with a bracket bolting next to the hood latch.
You may be missing a few brackets. Contact the seller and ask for pictures of his kit installed and confirm that you have everything you need.
You can check out this thread for some pics of my installation.
That looks like a Rotary Extreme kit. Ben from RE is really helpful and knows these kits inside and out, shoot him a PM.
Feel free to PM me if you have any questions as you try to piece it together. Good luck!
#73
The divider's on my list. The current set up still spools pretty damn quick - I love my twins!
Please shoot me a PM with the details on what you recommend for that. I'll see if I can have it done locally.
I'm also looking to order a dual oil cooler kit soon. I was wondering if we could do some custom options.
Happy birthday bud!
Please shoot me a PM with the details on what you recommend for that. I'll see if I can have it done locally.
I'm also looking to order a dual oil cooler kit soon. I was wondering if we could do some custom options.
Happy birthday bud!
#74
Registered User
iTrader: (6)
Thanks man.
ZumspeedRX7,
sorry ahead of time for posting non related stuff in your thread....lol
my wife (green monster above) is the best thing that's happened to me.
but Im also behind on the VM's because the business has taken so much time I almost lost her. They say its all about balance.
Well, love is something special. Im lucky she has understood the situation Im in, Im lucky that the RX7 community is a real good crowd.
Well its my B-Day and Im getting lucky tonight damnit....hahahahaha
Cheers, Ben
ZumspeedRX7,
sorry ahead of time for posting non related stuff in your thread....lol
my wife (green monster above) is the best thing that's happened to me.
but Im also behind on the VM's because the business has taken so much time I almost lost her. They say its all about balance.
Well, love is something special. Im lucky she has understood the situation Im in, Im lucky that the RX7 community is a real good crowd.
Well its my B-Day and Im getting lucky tonight damnit....hahahahaha
Cheers, Ben
#75
Registered User
iTrader: (6)
The divider's on my list. The current set up still spools pretty damn quick - I love my twins!
Please shoot me a PM with the details on what you recommend for the divider. I'll see if I can have it done locally. I'm also looking to order a dual oil cooler kit soon with some potential customization.
Happy birthday bud!
Please shoot me a PM with the details on what you recommend for the divider. I'll see if I can have it done locally. I'm also looking to order a dual oil cooler kit soon with some potential customization.
Happy birthday bud!