So I managed to find a really nice A-pillar mount for my RHD FD, but after purchasing another two gauges i've got nothing to mount them with. I went back down to the place I bought the pillar (Lordco had it actually, i was surprised). And they offered nothing else for RHD.

What I was looking at getting was a steering column mount. (Which they had for other cars, LHD/RHD doesn't apply here, they simply didn't have an RX7 one) And something in the center console. (The ones in the center i've seen face to the left side)

Also, which gauges did everyone start with? My first two were a boost and water temp, since then i've bought a Exhaust temp and A/F ratio (Narrowband). Want to get one more but i'm not sure what to do. Don't wanna go more than five gauges, otherwise it's gunna start looking a little cluttered haha.

Thinking somewhere along the lines of

Two on the pillar
Two in the center
One in the steering column.

Thanks in advance!!

 

We have produced the RHD specific Carbon Fiber Dash Center Speaker Gauge Pods for RotaryArt UK and you can purchase the pods straight from them. Here is some more info: http://www.rotaryart.uk.com/acatalog..._products.html

Feel free to contact me or Gary, owner of RotaryArt UK, if you have any other questions! Thanks!

 

http://www.rhdjapan.com
They have some pods, strictly RHD...

 

Cool! Thanks so much, I actually had seen links for these two sites before but had totally forgot about them.

What about my fifth gauge? What do you guys think I should go for next?

I've got..
Boost/Vaccum
Water temp
Narrowband A/F
Exhaust temp

Thanks again!

 

no idea where i got the center channel speaker gauge mount but this is my setup

water temp, wide band and an apexi boost gauge mounted in an HKS rubber holder thing

not the best pic in the world ....i really need a tripod for night shots



i would get oil temp or oil pressure personally

 

http://www.rhdjapan.com