Reusable housings ?
#1
Full Member
Thread Starter
Join Date: Dec 2008
Location: Rennes, Britanny - France
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Reusable housings ?
Hello,
I've just opened my last spare engine to get my car running again. Despite that the front rotor, front plate, middle plate and e-shaft are not reusable (this engine might have seen some high revs...), I was wondering about the housings.
Can you tell me which one can be reused, which one I should threw away ?
First, housing "A", about the cracks around the spark plug holes
(high res)
(high res)
Second, housing "B", looks a bit worn out ...
(high res)
But more importantly, there is some missing matter there :
(high res)
(high res)
Third, housing "C", which shows some wear ... too much wear ? :
(high res)
(high res)
(high res)
Here you can see the mirror effect
(right one, obviously)
(high res)
Thanks a lot guys !
I've just opened my last spare engine to get my car running again. Despite that the front rotor, front plate, middle plate and e-shaft are not reusable (this engine might have seen some high revs...), I was wondering about the housings.
Can you tell me which one can be reused, which one I should threw away ?
First, housing "A", about the cracks around the spark plug holes
(high res)
(high res)
Second, housing "B", looks a bit worn out ...
(high res)
But more importantly, there is some missing matter there :
(high res)
(high res)
Third, housing "C", which shows some wear ... too much wear ? :
(high res)
(high res)
(high res)
Here you can see the mirror effect
(right one, obviously)
(high res)
Thanks a lot guys !
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,855
Received 2,617 Likes
on
1,854 Posts
all three of those look pretty beat.... send the pics to goopy and see what he can do
#5
Full Member
Thread Starter
Join Date: Dec 2008
Location: Rennes, Britanny - France
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
At least everyone agrees ... ^^
I've forget to mention that it's for a track car. Drift car precisely, with a lot of high rev / high load.
Thanks guys, now I'm looking for a new engine as it will be a bit faster to get the car running in time ...
I've forget to mention that it's for a track car. Drift car precisely, with a lot of high rev / high load.
Thanks guys, now I'm looking for a new engine as it will be a bit faster to get the car running in time ...
Thread
Thread Starter
Forum
Replies
Last Post