tt2323

I'll be getting my new motor in hopefully this upcoming week, and want to rid myself off all that crap under the UIM. I know they sell hosing kits but since i'm going non-seq. i won't be needing much.

Is there a local retailer like Advanced/autozone that would have hose that would work for this application which size and which brand?? TIA...

Mahjik

iTrader: (1)

My local O'Rielly's had some vacuum tubing, but it was the standard rubber stuff. Not what I would recommend.

You are better off ordering a few feet from some place online. I prefer Baker Precision's tubing:

http://www.bakerprecision.com/hosetech.htm

If you are going non-seq, I'm not sure if you need any 6mm, but you'll need 4mm for sure. I would just order about 15 feet of hose and see if that gets it all. I always keep a few extra feet of hose around "just in case".

tt2323

Thanks for the advice as always Mahijik, does anyone know which size hose i need for the non-seq conver?

c00lduke

some 4mm some 6mm and some 8mm. If you check out the robs site in the newbie link it should give you all the info you need.