Replacing hoses/non-seq Which and what length
 

I'll be getting my new motor in hopefully this upcoming week, and want to rid myself off all that crap under the UIM. I know they sell hosing kits but since i'm going non-seq. i won't be needing much.

Is there a local retailer like Advanced/autozone that would have hose that would work for this application which size and which brand?? TIA...

My local O'Rielly's had some vacuum tubing, but it was the standard rubber stuff. Not what I would recommend.

You are better off ordering a few feet from some place online. I prefer Baker Precision's tubing:

http://www.bakerprecision.com/hosetech.htm

If you are going non-seq, I'm not sure if you need any 6mm, but you'll need 4mm for sure. I would just order about 15 feet of hose and see if that gets it all. I always keep a few extra feet of hose around "just in case". ;)

Thanks for the advice as always Mahijik, does anyone know which size hose i need for the non-seq conver?

some 4mm some 6mm and some 8mm. If you check out the robs site in the newbie link it should give you all the info you need.