3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

replacing egr

Thread Tools
 
Search this Thread
 
Old Jul 7, 2005 | 12:30 PM
  #1  
polyfc's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Apr 2004
Posts: 635
Likes: 0
From: Omaha, NE
replacing egr

how difficult would it be to replace the egr myself as well as the cost. if not how much would it cost to have it done, sorry i have minimal time to research these things, and i'm posting this during class. thanks
Reply
Old Jul 7, 2005 | 12:33 PM
  #2  
BlueRex's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Sep 2004
Posts: 2,444
Likes: 0
From: Bay Area, CA
Don't replace the EGR as it will most likely not solve the problem. The passages become clogged overtime and usually it is not the valve itself that is failing. The best solution is to replace it with a 12v relay as detailed in this thread:

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/question-about-12v-relay-fix-egr-345468/
Reply
Old Jul 8, 2005 | 11:53 AM
  #3  
polyfc's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Apr 2004
Posts: 635
Likes: 0
From: Omaha, NE
The guy I'm buying it from said he had it checked and it was the egr, plus the engine only has 5k on it. Not sure if that makes a difference but i'll try the 12v relay see if that turns the check engine light off. thanks for the info
Reply
Old Jul 8, 2005 | 03:16 PM
  #4  
CantGoStraight's Avatar
What's your point ?
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 3,573
Likes: 0
From: Gainesville, Fla.
Would have to guess this is a 94 since you didn't say and the 93 doesn't care, the 95 doesn't have one. If your going to upgrade later any way then get a different ecu. They usually go cheaper or as cheap as the egr any way. Jack
Reply
Old Jul 8, 2005 | 05:01 PM
  #5  
polyfc's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Apr 2004
Posts: 635
Likes: 0
From: Omaha, NE
got it fixed earlier this morning, just some carbon buildup, cleaned right off and turned that annoying light off with it. thanks
Reply
Old Jul 8, 2005 | 07:16 PM
  #6  
BlueRex's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Sep 2004
Posts: 2,444
Likes: 0
From: Bay Area, CA
Originally Posted by polyfc
got it fixed earlier this morning, just some carbon buildup, cleaned right off and turned that annoying light off with it. thanks
Cleaning the carbon build up tends to be a temporary fix. In a couple weeks it will start throwing the CEL again. The 12v relay fix is the best way to eliminate the problem.
Reply
Old Jul 8, 2005 | 09:47 PM
  #7  
polyfc's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Apr 2004
Posts: 635
Likes: 0
From: Omaha, NE
funny you should say that cause the damn light came back on about an hour ago. I'll probably end up doing that relay fix in the next couple of weeks or whenever i come home again, thanks again rex
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t-von
3rd Generation Specific (1993-2002)
9
Sep 10, 2015 01:56 PM
BLK 93
3rd Generation Specific (1993-2002)
11
Sep 9, 2015 10:56 AM
Frox
General Rotary Tech Support
2
Sep 8, 2015 08:36 AM
Enzo1944
New Member RX-7 Technical
2
Sep 6, 2015 08:57 AM




All times are GMT -5. The time now is 02:59 AM.