I did a search but never found a direct answer to this question. If I run the Touge Factory pulley set, do I need to run a different belt? If so, what belt can I use?

Specifics: Air pump and PS still intact, no AC

Thanks in advance!

 

Yes, you'll need a different belt.
I believe Banzai pulleys are the same as Touge sells. Banzai has a guide and sells the various lengths depending on the variables of your particular car (scroll down) ---> Pulleys & Belts (93+ RX-7)
Off-hand it looks like you'd need Belt #4

 

I think that kit is stock size or near stock size. Worst case if you need a belt, tie a string or wire around the pullies to get an approximate size then go to the parts store. You may need to try a few belts to find the perfect size.

Actually just did that yesterday .

Dale

 

Thanks guys! I actually came across that Banzai guide after posting the thread but it's still better to hear from fellow members. I'll try that string trick too.

 

For future reference, if you're running TF pulleys with the air pump and no AC, these are the belts to use:

 

I ordered that power steering belt and it is too long, it needs to be 35" not 35.5".

 

You need belt #4 from our site