Replace stock coolant gauge w/dual function ?
11-04-04, 01:35 PM
#1
Replace stock coolant gauge w/dual function ?
Any downsides with replacing the stock coolant-temp gauge with a dual-function Boost / Coolant-temp gauge (with peak recall) ?
Has anyone done it before ? If so, what gauge did you use?
I'm thinking of the SPA Techniques one found here:
and sold here:
http://www.racerpartswholesale.com/spagauge.htm
:-) neil
Has anyone done it before ? If so, what gauge did you use?
I'm thinking of the SPA Techniques one found here:
and sold here:
http://www.racerpartswholesale.com/spagauge.htm
:-) neil
11-04-04, 02:09 PM
#2
development
11-04-04, 02:39 PM
#3
RX-7 Bad Ass
iTrader: (55)
It really isn't a good idea to have boost as a digital display. You really need an analog display for boost - that shows you the boost pattern and trends much easier. Real important when troubleshooting or monitoring the stock twins.
Also, the install in the stock cluster isn't easy - it's pretty invasive to put it in that spot.
Get a regular analog boost gauge.
Dale
Also, the install in the stock cluster isn't easy - it's pretty invasive to put it in that spot.
Get a regular analog boost gauge.
Dale
