Removing Orange Bulb from RX-7store Upgraded turn signals!
#1
Full Member
Thread Starter
Join Date: Nov 2003
Location: Denver, CO
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Removing Orange Bulb from RX-7store Upgraded turn signals!
The few of you out there with these bumper lights, did you remove the orange bulb?
It's held on with a screw from the inside of the light, is there a way to pull the lense off without damaging anything?
I am tempted just to try and break the bulb off of the tab holding it in there and then cut it up in pieces to remove it....
Any ideas?
Greg Doyle
It's held on with a screw from the inside of the light, is there a way to pull the lense off without damaging anything?
I am tempted just to try and break the bulb off of the tab holding it in there and then cut it up in pieces to remove it....
Any ideas?
Greg Doyle
#3
Full Member
Thread Starter
Join Date: Nov 2003
Location: Denver, CO
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
I can't figure out how to remove mine either. Haven't need to... yet...
Greg
#6
Senior Member
Join Date: Jul 2002
Location: Greensboro / Charlotte NC
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Ibspoolin
Thanks for the informative post, is their anyone who has any useful information?
Thanks for the informative post, is their anyone who has any useful information?
Trending Topics
#8
Senior Member
It sounds like they are similar to the factory lenses. You can break it and cut the pieces out (I've hear people doing that with the factory one) or heat up the glue and take the lense apart. I did that with mine (factory). Just make sure you reseal it good to prevent moisture.