3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Removing factory BOV for aftermarket

Thread Tools
 
Search this Thread
 
Old 05-09-11, 03:36 PM
  #1  
Full Member

Thread Starter
iTrader: (3)
 
Zatzy's Avatar
 
Join Date: Aug 2009
Location: Canada
Posts: 136
Received 5 Likes on 4 Posts
Removing factory BOV for aftermarket

I took a look and people give a few different answers. What I have is the greddy compression elbow with a gready BOV on it. I am wondering if I can plug off both the ABV and CRV right at the manifold and just run the vaccum line from the ABV to the Greddy BOV? I am running the stock twins still.
Old 05-09-11, 04:35 PM
  #2  
Full Member

 
jectrx7's Avatar
 
Join Date: May 2005
Location: washington
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
you can use the aftermarket bov but keep the crv hooked up. Do a little reserch and you will know what the crv is used for.
Old 05-09-11, 05:13 PM
  #3  
Full Member

Thread Starter
iTrader: (3)
 
Zatzy's Avatar
 
Join Date: Aug 2009
Location: Canada
Posts: 136
Received 5 Likes on 4 Posts
Ya I was just making sure. some people have said yes you can block off both and others have said keep the CRV. So I can just block the ABV off right? thats the top one on the manifold if im correct?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM



Quick Reply: Removing factory BOV for aftermarket



All times are GMT -5. The time now is 04:16 AM.