Removing factory BOV for aftermarket
 

I took a look and people give a few different answers. What I have is the greddy compression elbow with a gready BOV on it. I am wondering if I can plug off both the ABV and CRV right at the manifold and just run the vaccum line from the ABV to the Greddy BOV? I am running the stock twins still.

you can use the aftermarket bov but keep the crv hooked up. Do a little reserch and you will know what the crv is used for.

Ya I was just making sure. some people have said yes you can block off both and others have said keep the CRV. So I can just block the ABV off right? thats the top one on the manifold if im correct?