Removing 99 spec front lights?
#1
Full Member
Thread Starter
Join Date: Apr 2006
Location: Side Ways
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Removing 99 spec front lights?
Just need to replace one of the side lights in my 99 spec front lights, but cant see how it's attached. It's an aftermarket front fiberglass end and the lights appear to have no screw hole on the front like the older style front lights. However they are genuine mazda 99 spec parts.
Is there an obvious way of taking these out to replace the bulbs? Didnt want to break anything just incase it's bonded in or incase i've missed something.
Is there an obvious way of taking these out to replace the bulbs? Didnt want to break anything just incase it's bonded in or incase i've missed something.
#2
Easiest way to get them out for me was to pop up the headlights, pull the black cover and then you can reach the 2 bolts on the back of the lights. takes about 5 minutes.
#3
Top's always down
iTrader: (5)
whenever I have to get at my 99spec lights, I either reach in through the fender well or through the oil cooler duct. I have a C-West front, which has absolutely massive oil cooler openings, so if you have a front with smaller openings (burnout, or something) you may have to go through the fender well.
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM