relocating wires/coils on rhd models
05-29-08, 10:41 AM
#1
Senior Member
Thread Starter
Join Date: Aug 2006
Location: next door
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
relocating wires/coils on rhd models
need to replace wires so while im at it im gonna relocate the coils from under the uim...my question is ..
what wires are people useing for this mod and where are people relocating them on rhd models?[still have abs]
ive read topics and seen pics of lhd versions on this site before but cant find the thread .
what wires are people useing for this mod and where are people relocating them on rhd models?[still have abs]
ive read topics and seen pics of lhd versions on this site before but cant find the thread .
05-30-08, 01:10 PM
#3
Most people end up making their own plug wires (as you can make the exact length you wan). I had heard about some people using FC plug wires but I cannot verify that they will work. IMO, if you are doing something like that, it's best to make your own.
As far as mounting, the idea is the keep the coils as close to the plug as possible (which is why they are located where they are). So if you are going to relocate them, I've seen people put them all over the place on their cars. I've seen a show car with them relocated to the front near the hood latch area. However, for performance, if you can't shorten the plug wire distance, I would leave it stock.
As far as mounting, the idea is the keep the coils as close to the plug as possible (which is why they are located where they are). So if you are going to relocate them, I've seen people put them all over the place on their cars. I've seen a show car with them relocated to the front near the hood latch area. However, for performance, if you can't shorten the plug wire distance, I would leave it stock.
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
3
09-28-15 09:25 PM