Rear OEM Wing install
02-09-06, 10:28 AM
#1
Rear OEM Wing install
Okay guys I know this subject has been beat to death. I've done many different variations of searches for information. The best info I've come up with points to the fd3s site with the templates and instructions for drilling holes and mounting the OEM wing.
The problem is, the template isn't scanned in straight so all of the edges do not match up evenly and the spacing between holes is incorrect based on the dimensions specified.
That being said, I'm going to go and make my own template using the wing, but I'd like to see some close up shots of a factory rear spoiler installed so I can see exactly how it's supposed to be positioned. I tried ordering the template but the dealership (Malloy) couldn't get them.
Any other recommendations from people who have done this would be appreciated. Thanks!
The problem is, the template isn't scanned in straight so all of the edges do not match up evenly and the spacing between holes is incorrect based on the dimensions specified.
That being said, I'm going to go and make my own template using the wing, but I'd like to see some close up shots of a factory rear spoiler installed so I can see exactly how it's supposed to be positioned. I tried ordering the template but the dealership (Malloy) couldn't get them.
Any other recommendations from people who have done this would be appreciated. Thanks!
02-09-06, 12:08 PM
#3
Originally Posted by stokedxiv
Here is a high-res shot of my car, you can see it pretty good
http://copland.udel.edu/~cbaynes/IMG_2556.jpg
http://copland.udel.edu/~cbaynes/IMG_2556.jpg
Thread
Thread Starter
Forum
Replies
Last Post
