3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Rear Caliper Rebuild

Thread Tools
 
Search this Thread
 
Old Apr 21, 2013 | 08:19 AM
  #1  
curacaosfinest's Avatar
Thread Starter
1.3 Liter V8 Eater
Tenured Member 05 Years
iTrader: (12)
 
Joined: Sep 2008
Posts: 1,881
Likes: 2
From: Miami, FL
Rear Caliper Rebuild

Hey guys,

I want to service my rear brake calipers, but i'm not sure wheres the best place to buy the rebuild kit.

So whats the best place to buy a kit to do it for the rear FD?

Thanks,
VJ

Reply
Old Apr 21, 2013 | 09:39 AM
  #2  
gdub29e's Avatar
Rotary Enthusiast
Tenured Member: 15 Years
iTrader: (17)
 
Joined: Apr 2011
Posts: 804
Likes: 286
From: Millersville Md
The dealer. I bought the oem rebuild "kit" for the rears. Came with everything you need and they are pretty cheap. Word of advice, if you do the parking brake side buy new snap rings that hold the spring retainer in ( doesn't come with the kit). After you remove them they don't hold as well.
Reply
Old Apr 21, 2013 | 10:43 PM
  #3  
scamil87's Avatar
Full Member
Tenured Member: 15 Years
iTrader: (3)
 
Joined: Feb 2008
Posts: 152
Likes: 0
From: Massachusetts
Originally Posted by gdub29e
The dealer. I bought the oem rebuild "kit" for the rears. Came with everything you need and they are pretty cheap. Word of advice, if you do the parking brake side buy new snap rings that hold the spring retainer in ( doesn't come with the kit). After you remove them they don't hold as well.
That would explain why my rear left caliper keeps locking up whenever i use the parking brake. goddamn it. That part sucked to put back together too.
Reply
Old Apr 22, 2013 | 09:11 AM
  #4  
ptrhahn's Avatar
Lives on the Forum
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Feb 2002
Posts: 9,282
Likes: 703
From: Arlington, VA
Is there anyplace out there with GOOD caliper rebuild instructions? I ended up just buying refurbished calipers, because I didn't feel confident in just winging the rebuild.
Reply
Old Apr 22, 2013 | 10:11 AM
  #5  
gdub29e's Avatar
Rotary Enthusiast
Tenured Member: 15 Years
iTrader: (17)
 
Joined: Apr 2011
Posts: 804
Likes: 286
From: Millersville Md
Originally Posted by scamil87
That would explain why my rear left caliper keeps locking up whenever i use the parking brake. goddamn it. That part sucked to put back together too.
You got it! I found when you remove the old retaining ring you have to pinch it together so much that you actually bend it past reuse. An you can forget bending it back.



Originally Posted by ptrhahn
Is there anyplace out there with GOOD caliper rebuild instructions? I ended up just buying refurbished calipers, because I didn't feel confident in just winging the rebuild.
Yes, and its actually not very hard to rebuild them. Its only a few simple tools and some time. I wrote a diy on the s2k forum a while back but unfortunately your not allowed to link on this forum. If you search on there, you will find a complete write up with pictures on how to. The two rear assemblies are identical to each other. I would highly suggest looking it up and if you decide to tackle it, Buy new c-clips and c-clip pliers. Period.

here is a picture of all the parts for the rear parking brake caliper and the order that they go in.
Name:  image-5_zps3d5de096.jpg
Views: 91
Size:  70.1 KB
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM
Marty RE
New Member RX-7 Technical
0
Aug 17, 2015 09:36 AM
Marty RE
New Member RX-7 Technical
0
Aug 13, 2015 11:19 AM




All times are GMT -5. The time now is 05:54 AM.