3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

re-amemiya ecu

Thread Tools
 
Search this Thread
 
Old May 2, 2008 | 09:39 PM
  #1  
brian92jdmfd's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Apr 2008
Posts: 42
Likes: 0
From: cambridge
re-amemiya ecu

hey I just got this car and as far as I can tell the past owner spent lots of money on this fd. It has a re-amemiya ad facer body kit on it and re-amemiya i.c. pipes. I seen that they make an ece and I dont know if I have one so how can I check? Its just that I got the car just cause it looked like it needed a little TLC and would come back to life. every day I find a new aftermarket part that I have never heard of. so where is the ecu, and what # or markings would I look for on a re-amemiya ecu? thanks!!
Reply
Old May 2, 2008 | 09:57 PM
  #2  
4CN A1R's Avatar
sleeper
iTrader: (6)
 
Joined: Oct 2007
Posts: 1,957
Likes: 3
From: Abbottstown, PA
check the passenger side kick pannel. it most definitly should have an aftermarcket ecu.
Reply
Old May 2, 2008 | 11:08 PM
  #3  
brian92jdmfd's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Apr 2008
Posts: 42
Likes: 0
From: cambridge
its RHD so are you dayn the left side? Its not on the driver side thats where the fuse box is
Reply
Old May 2, 2008 | 11:11 PM
  #4  
brian92jdmfd's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Apr 2008
Posts: 42
Likes: 0
From: cambridge
I would post more picks but I cant figure it out lol
Reply
Old May 3, 2008 | 12:09 AM
  #5  
4CN A1R's Avatar
sleeper
iTrader: (6)
 
Joined: Oct 2007
Posts: 1,957
Likes: 3
From: Abbottstown, PA
why not just check the other side then
Reply
Old May 3, 2008 | 12:41 AM
  #6  
brian92jdmfd's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Apr 2008
Posts: 42
Likes: 0
From: cambridge
its just that I have to drive over and see it thats all
Reply
Old May 3, 2008 | 12:56 AM
  #7  
brian92jdmfd's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Apr 2008
Posts: 42
Likes: 0
From: cambridge
when I start the car it revs to 1200 not 3000 like the cold start, smells real rich! runs nice and really fast, spools so fast never had it over 4500 yet but will soon
Reply
Old May 3, 2008 | 02:25 AM
  #8  
keinikaidoh's Avatar
Junior Member
 
Joined: Feb 2008
Posts: 43
Likes: 0
From: Canada
k..well, I also have a RHD FD. Mine is Apexi PowerFC ECU. It is located on the passenger side(left side) kick panel. I'm pretty sure yours would be there too.
Reply
Old May 3, 2008 | 03:38 AM
  #9  
Narfle's Avatar
Rx7 Wagon
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (16)
 
Joined: Nov 2002
Posts: 6,978
Likes: 888
From: California
I had an re amemiya ecu at one point and would not recommend it. Any tech support will be in japanese and aworld away. Apparently most of them are tuned for individual cars and in several different stages that you probably wont be able to discern. Id go with a pettit unlimited or a power FC depending on your budget and goals.
Reply




All times are GMT -5. The time now is 12:03 AM.