radio 'ERR' code
Thread Starter
Unconfirmed
Joined: Feb 2002
Posts: 65
Likes: 0
From: D'ville, C'ville VA
radio 'ERR' code
could someone send me the info on how to bypass or unlock the factory radio? it comes up w/ "ERR" code. i know if i enter the wrong code 3 times it locks up.thanks
ward3zx@yahoo.com
ward3zx@yahoo.com
Blow up or win
Joined: May 2001
Posts: 2,014
Likes: 3
From: Altezzaville
If I remember correctly:
Press scan and Auto-M at the same time.
Input your code number.
Press scan and Auto-M and hold, and you'll here a beep, give it a few seconds and it should be functional again.
If not, your code number is incorrect and then you are essentially screwed, glued and tatooed!
Press scan and Auto-M at the same time.
Input your code number.
Press scan and Auto-M and hold, and you'll here a beep, give it a few seconds and it should be functional again.
If not, your code number is incorrect and then you are essentially screwed, glued and tatooed!
It's not that bleak.. I searched for a while to find the code.. I had one dealer tell me he had to replace the whole unit for $380. When I told him that I knew he just had to punch in a code, he hung up on me. Rediculous. Anyway:
Press "SCAN"
Press "AM/FM"
Press "AUTO M"
Press "Tune UP"
The display should read "------"
Using the memory presets buttons, enter the code "1 4 1 4"
Press "Scan" and "Auto M" simultaneously and hold until the clock appears.
The radio should now be cleared. There is a time limit on entering each command, so it may take one or two tries.
--Dave
Press "SCAN"
Press "AM/FM"
Press "AUTO M"
Press "Tune UP"
The display should read "------"
Using the memory presets buttons, enter the code "1 4 1 4"
Press "Scan" and "Auto M" simultaneously and hold until the clock appears.
The radio should now be cleared. There is a time limit on entering each command, so it may take one or two tries.
--Dave
Thread
Thread Starter
Forum
Replies
Last Post
