radio 'ERR' code
06-08-02, 01:27 PM
#1
Unconfirmed
Thread Starter
Join Date: Feb 2002
Location: D'ville, C'ville VA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
radio 'ERR' code
could someone send me the info on how to bypass or unlock the factory radio? it comes up w/ "ERR" code. i know if i enter the wrong code 3 times it locks up.thanks
ward3zx@yahoo.com
ward3zx@yahoo.com
06-08-02, 03:25 PM
#2
Blow up or win
If I remember correctly:
Press scan and Auto-M at the same time.
Input your code number.
Press scan and Auto-M and hold, and you'll here a beep, give it a few seconds and it should be functional again.
If not, your code number is incorrect and then you are essentially screwed, glued and tatooed!
Press scan and Auto-M at the same time.
Input your code number.
Press scan and Auto-M and hold, and you'll here a beep, give it a few seconds and it should be functional again.
If not, your code number is incorrect and then you are essentially screwed, glued and tatooed!
06-08-02, 03:37 PM
#3
Tequila? ..it's like beer
iTrader: (1)
Join Date: Mar 2001
Location: Woodbine, MD
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
It's not that bleak.. I searched for a while to find the code.. I had one dealer tell me he had to replace the whole unit for $380. When I told him that I knew he just had to punch in a code, he hung up on me. Rediculous. Anyway:
Press "SCAN"
Press "AM/FM"
Press "AUTO M"
Press "Tune UP"
The display should read "------"
Using the memory presets buttons, enter the code "1 4 1 4"
Press "Scan" and "Auto M" simultaneously and hold until the clock appears.
The radio should now be cleared. There is a time limit on entering each command, so it may take one or two tries.
--Dave
Press "SCAN"
Press "AM/FM"
Press "AUTO M"
Press "Tune UP"
The display should read "------"
Using the memory presets buttons, enter the code "1 4 1 4"
Press "Scan" and "Auto M" simultaneously and hold until the clock appears.
The radio should now be cleared. There is a time limit on entering each command, so it may take one or two tries.
--Dave
Thread
Thread Starter
Forum
Replies
Last Post
