Quick question about front bar. core support?
#1
FD Maniac
Thread Starter
Join Date: Sep 2003
Location: Jacksonville FL
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
Quick question about front bar. core support?
Is the front bar the that has the hood latch on it the radiator core support? If so can you buy a new one from some where and have it welded on? What should I do if I am missing this bar?
#2
Do it right, do it once
iTrader: (30)
IIRC it is about $150 from the dealer new. Have a good shop put it in, it'll require a fair amount of teardown to replace.
See pics here:
Entire project http://community.webshots.com/album/69912816VsRYvb
The part your interested in http://community.webshots.com/photo/...72690110HinNkC
The top piece is VERY flimsy, the lower piece is pretty solid and I think they are sold separately. Buy both together (pre-assembled) and have it put on, it'll turn out better that way.
See pics here:
Entire project http://community.webshots.com/album/69912816VsRYvb
The part your interested in http://community.webshots.com/photo/...72690110HinNkC
The top piece is VERY flimsy, the lower piece is pretty solid and I think they are sold separately. Buy both together (pre-assembled) and have it put on, it'll turn out better that way.
#4
Do it right, do it once
iTrader: (30)
No. The front bumper, radiator, airbox, etc need to come out. The motor came out of that car because it also needed a frame rail which is a much more involved repair.
The core support is spot welded to the front face of the frame rails. Should be a very straight forward repair for any bodyshop.
The core support is spot welded to the front face of the frame rails. Should be a very straight forward repair for any bodyshop.
#5
Rotary Freak
iTrader: (8)
IIRC it is about $150 from the dealer new. Have a good shop put it in, it'll require a fair amount of teardown to replace.
See pics here:
Entire project http://community.webshots.com/album/69912816VsRYvb
The part your interested in http://community.webshots.com/photo/...72690110HinNkC
The top piece is VERY flimsy, the lower piece is pretty solid and I think they are sold separately. Buy both together (pre-assembled) and have it put on, it'll turn out better that way.
See pics here:
Entire project http://community.webshots.com/album/69912816VsRYvb
The part your interested in http://community.webshots.com/photo/...72690110HinNkC
The top piece is VERY flimsy, the lower piece is pretty solid and I think they are sold separately. Buy both together (pre-assembled) and have it put on, it'll turn out better that way.
Also, anyone have the part numbers ?
TIA
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM