3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

quick question about block off plates?

Thread Tools
 
Search this Thread
 
Old 07-07-03, 04:13 PM
  #1  
bow leggin'

Thread Starter
iTrader: (25)
 
Scrub's Avatar
 
Join Date: Jul 2002
Location: Delaware
Posts: 6,061
Received 5 Likes on 5 Posts
quick question about block off plates?

Okay so I have blocked off the EGR and ACV and a couple other things that dosen't have to do with my question. But I did not remove the pipe that goes from the rear of the LIM to the main cat...or where it would connect to the main cat. Now, does that mean that air is flowing straight through their? Or is nothing going to come out?
Old 07-07-03, 04:24 PM
  #2  
5yr member, joined 2001

 
JONSKI's Avatar
 
Join Date: Dec 2001
Location: Marco Island, FL
Posts: 908
Likes: 0
Received 1 Like on 1 Post
If your ACV is blocked off, then nothing is going in or out of that pipe.


[edit]Don't forget to unplug (the grey w/ orange insert electrical connector) or eliminate your airpump. If you let it run while it is blocked off, then it will sieze up.
Old 07-07-03, 04:30 PM
  #3  
bow leggin'

Thread Starter
iTrader: (25)
 
Scrub's Avatar
 
Join Date: Jul 2002
Location: Delaware
Posts: 6,061
Received 5 Likes on 5 Posts
I removed the air pump. So no air is being fed throught that pipe that is connected to the rear of the LIM?
Old 07-07-03, 04:39 PM
  #4  
5yr member, joined 2001

 
JONSKI's Avatar
 
Join Date: Dec 2001
Location: Marco Island, FL
Posts: 908
Likes: 0
Received 1 Like on 1 Post
Originally posted by Scrub
I removed the air pump. So no air is being fed throught that pipe that is connected to the rear of the LIM?
Right, because the inlet for that pipe is controlled by the ACV. The details of the ACV start on page F-115 of the FSM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Snoopy FD
Build Threads
25
12-08-15 01:45 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM



Quick Reply: quick question about block off plates?



All times are GMT -5. The time now is 09:19 PM.